Hi all
I have now tested my Q6600 G0 but i cant go higher than 3,4Ghz
If i set it to 3,50Ghz windows doesnt boot
If i set the vcore higher, than it doesnt boot again.
I got the Q6600 G0 L728A826 1,2875 Vid
If i set the Vcore in the Bios on 1,5volt it doesnt help i cant boot with that vcore to.

Does it help if i set the fsb termination or the mch chipset voltage or the ich chipset voltage higher to get higher clock ?
I hear that many Q6600's can run 3,6Ghz with no problem.
Why i cant get over 3,5Ghz ?
I run it with a Asus P5W DH Deluxe, and Kingston HyperX DDR2 800mhz
The voltage of the mem is set to auto at this moment.

Can some help me with some settings.
Thanks..