Tek9 3.0 LN2/DI GPU unit

[k|ngp|n]

People who are using tubes, insulating, volt modifying should be capable of handling a shim
Go the full face, just like my kayl pots

100% agree.

Heh, heh, heh.......
I have the first Tek-9s and I'm happy....They suck a lot of LN2 during bench coz of the high clocked VGA but it's OK with me ......and my VGA's of caurse......They STILL CAN handle the VGAs and even drive them to cold bug if I pour more LN2 in them during a bench....

SO I believe that with those beauties, a user will not have to be "focused" of the VGAs that much, when driving them to the edge.....

Couldn't have said it better than that with regards to LN2 performance. The old units can remove heat rapidly no matter the load. Never had any issues with those units ever in regards to getting proper cooling to the vga's with LN2.

These new units have a much different tune on them with LN2, they swing ALOT slower due to the new internal design. It was something to get used to at first because the old revs behaved quite differently.

Tuning on the new units really hold well. Not nearly the same ammount of pouring that the old ones need. MUCH easier to bench these units on LN2 making 3 unit benching by a single individual ALOT easier.
Can hold temp swings between pours less than one degree for full game tests pushing the cards very hard with 3.0 rev. The unit does all the work now and the user just have to make sure to have the right ammount of LN2 in the unit
for the load.

BTW--went back to LN2 last night on this 2900xt and was getting full 05's off at 1260mhz/1.63v, gonna push the cards voltage all the way today on LN2 to see how much it can take on the unit .