we've found THE GOLDEN ONEs : AMD Athlon64 World Record Thread!!

[gianni-gt]

hohoho the party will go on... yesterday i've found and bought this chip in switzerland:



i hope it will rock under the cascade of splmann:

[dinos22]

-128C on core
what sort of evap temps are you getting there man -150 or something eek

[knopflerbruce]

CAB1E 0622EPMW 3800+: this one suxx to 100%... the mem-controller is a crap....

the 3500+ could be really nice...

Tried that 3800+ that was supposed to be crap

spi1m stable @ 2650mhz @ 1.55-1.6v @ 24c (don't remember exact vcore).

To avoid the CB I had to mount it badly, but I did it a little too bad, as the temp went to the roof @ 1.7v

Going to buy a phase change unit in a month or 2. One of those should be perfect for this one.

[Turrican]

wow, nice cascade gianni.
hope the fx rocks under it

[George_o/c]

OMG @gianni-gt: minus 128 degrees with a cascade NICE

[knopflerbruce]

Was this FX57 pretested?

I have an fx57 with the same stepping as yours. Didn't test it myself, but it was prime stable @ 3.65ghz @ 1.65v @ Vapo LS (-28c temp). At least that's what the previous owner said. Can you please test your chip with the same kind of cooling so I know what to expect from my chip?

It'll probably be a little while before I get my hands on cascade/ln2

[massman]

That a very good stepping for a FX-57. The same as Before's right?

[gianni-gt]

yapp... but mine is a different wafer... will see...

[Doman]

Aircooled. Room temp: 5°C, CPU temp: 25-30°C

http://valid.x86-secret.com/show_oc.php?id=252703

[gianni-gt]

my fx is a burner... i mean it's hotter than hell.... with 1.75V i have 0°C > in bios... the best score i've reached with 1.696V at -20°C (cpu-temp)...

3830.44MHz : http://valid.x86-secret.com/show_oc.php?id=253868

this chip need coldness. i think there are some more mhz with -100°C

with 1.55V at superpi i've no more subzero cpu-temps max-stable was 3519mhz @ 1.52V. i think i have to remove the ihs but that will happen after the cascade-session....

[knopflerbruce]

my fx is a burner... i mean it's hotter than hell.... with 1.75V i have 0°C > in bios... the best score i've reached with 1.696V at -20°C (cpu-temp)...

3830.44MHz : http://valid.x86-secret.com/show_oc.php?id=253868

this chip need coldness. i think there are some more mhz with -100°C

with 1.55V at superpi i've no more subzero cpu-temps max-stable was 3519mhz @ 1.52V. i think i have to remove the ihs but that will happen after the cascade-session....

Looks like a nice chip 4g should be np. I'm sure you'll beat your own record (the FX55 one)

[MaSell]

IHS is your enemy

[ryba]

my fx is a burner... i mean it's hotter than hell.... with 1.75V i have 0°C > in bios... the best score i've reached with 1.696V at -20°C (cpu-temp)...

3830.44MHz : http://valid.x86-secret.com/show_oc.php?id=253868

this chip need coldness. i think there are some more mhz with -100°C

with 1.55V at superpi i've no more subzero cpu-temps max-stable was 3519mhz @ 1.52V. i think i have to remove the ihs but that will happen after the cascade-session....

You must change thermal grase under your IHS. Ceramique is the best thing for this operation. I have the same situation with my FX-57.

[STEvil]

lap both sides of the IHS, changing TIM under it is pointless if you leave it concave/convex between core and IHS.

[eva2000]

hohoho the party will go on... yesterday i've found and bought this chip in switzerland:



i hope it will rock under the cascade of splmann:

should be okay here's my old one on Kayl Black FrozenSS 1/4HP single stage

[Turrican]

nice results, go for more

[nachthymnen]

The 0516 it's a very good batch...
My old one under Dice:


Suicide shot @ 3909.88Mhz under Dice:
http://valid.x86-secret.com/show_oc?id=61898

[gianni-gt]

and how much vcore did you used at 3.9gig?

i've tried today my fx-57 with prime under my single-stage but these load temps are killing me!

[nachthymnen]

If I remeber well 1,71v.
The FX-57 it's very hot in full
I've not tested with Prime, just fast bench
This is a spi with the FX-57 CABRIO liquidcooled(room @ 7°C)


Have you try also the FSB cold bug under phase?

[gianni-gt]

~325MHz @ -28°C

[nachthymnen]

~325MHz @ -28°C

I think it's good.
My ex 0516 252 @ -33

[gianni-gt]

coldbug with a free multi is really cool...

for example: booting with 8x200MHz, setting htt under 200MHz and then pump up the multiplier 40x100MHz or so... hehe

[nachthymnen]

coldbug with a free multi is really cool...

for example: booting with 8x200MHz, setting htt under 200MHz and then pump up the multiplier 40x100MHz or so... hehe

hehe, yes

[stunned_guy]

Nice cold bug gianni....more than 300 MHz under single stage with an FX is great so you will have more options for clocking

[gianni-gt]

splmann told me to not cut off the IHS before the cascade-session... i'm getting nervous