the p5e is an amazing board... @3.4 on my quad 1-1.... still testing....
the p5e is an amazing board... @3.4 on my quad 1-1.... still testing....
Thats not very much m8Originally Posted by purecain
not enough to declare the mobo amazing
i have some problems with P5E!
It wont run same settings as P5K-E with my E6750
On my P5K-E was it stable @ 4Ghz (1.40v VCore), P5E reboot after few seconds
Prime! i tried higher VCore, NB, SB, PLL, FSB but nothing help
noway if you are running with a g0 you shouldn't hit a wall yet, push it furtherThats not very much m8
not enough to declare the mobo amazing
Then you only have a FSB of something like 380 unless you run lower multi....
eVGA 680i (Asus Blitz Extreme on 30/10, Conroe E6850@(3,75GHz) (Swiftech Apogee GTX),
2x1GB OCZ Titanium Alpha VX2 PC-8000 CAS4 (Cellshock DDR3 1800MHz CL8 on the way) ...
Silverstone TJ09, WD Raptor 74,3GB Raid 0,
2xGainward 8800GTX (Ek Wave), Silverstone 850W,
Sennheiser HD650, Razer Barracuda headphones, Razer Tarantula
Microsoft Sidewinder 2, Dell 24" 2407WFP, Razer Habu, Steelpad S&S
Windows Vista Ultimate
(Vapochill LS)
nice does this board got vdroop?
And any new bios solved the vdroop for the formula?
Last edited by CERO; 10-11-2007 at 07:36 AM.
DFI Lanparty LT X48-T2R
Intel Q6600 L737B242 ~ VID 1.2125 ~ 4000mhZ @ 1.48 vcore {lapped}
eVGA 8800GTS (G92) 512MB {stock}
Crucial Ballistix PC8500 Tracer ~ 1200mhZ 5-5-5-12 @ 2.05v
Lian Li PC-V1000 {modded}
Corsair HX 620W
Creative X-FI ExtremeMusic
Western Digital Raptor X 150GB
Thermalright-Ultra120 Xtreme {lapped} ft. Scythe S-Flex SFF21F S-FDB ~ Push & Pull
The load line calibration does not functional on the maximus, future bios solved the problem.
Actually Vdroop for high voltage is 0,033volt and 0,018v for low voltage.
With Intel quad core you set in bios 1,25volt the phase providing 1,226v idle and 1,208v in full load, with 1,50volt the phase providing 1,470volt idle and 1,437 in full load.
thnx zilla for this info
DFI Lanparty LT X48-T2R
Intel Q6600 L737B242 ~ VID 1.2125 ~ 4000mhZ @ 1.48 vcore {lapped}
eVGA 8800GTS (G92) 512MB {stock}
Crucial Ballistix PC8500 Tracer ~ 1200mhZ 5-5-5-12 @ 2.05v
Lian Li PC-V1000 {modded}
Corsair HX 620W
Creative X-FI ExtremeMusic
Western Digital Raptor X 150GB
Thermalright-Ultra120 Xtreme {lapped} ft. Scythe S-Flex SFF21F S-FDB ~ Push & Pull
I do not believe that be resolved.
In my case I have 1.440v Idle and 1.384v load, with quad.
Difference of 0.056v, very bad.
Last edited by hornet; 10-12-2007 at 04:22 AM.
the real phase power must be measured from this point with Professional multimeter...I do not believe that be resolved.
In my case I have 1.440v Idle and 1.384v load, with quad.
Difference of 0.056v, very bad.
only one to ground
the real phase power must be measured from this point with Professional multimeter...
only one to ground
Thanks for the pic
RIG 1: Asus Rampage Extreme X48
RIG 2: Foxconn BloodRage X58
E8600 Q820A349 @ 4.75Ghz: http://valid.canardpc.com/show_oc.php?id=596270
Testing tonight compared to P5K premium
That's a pretty bad vdrop. I've seen it on many asus m/b's in the past, but i was hoping that maximus wouldn't fall in the same category...I do not believe that be resolved.
In my case I have 1.440v Idle and 1.384v load, with quad.
Difference of 0.056v, very bad.
Project ZEUS II
Asus Rampage II Extreme
Intel I7 920 D0 3930A @ 4.50GHz (21 X 214mhz)
3 x 2GB G.Skill Trident 1600 @ 1716MHz (6-8-6-20-1N)
2 x Asus HD 6870 CrossFire @ 1000/1100MHz
OCZ Vertex 2 60GB | Intel X25-M 120GB | WD Velociraptor 150GB | Seagate FreeAgent XTreme 1.5TB esata
Asus Xonar DX | Logitech Z-5500 | LG W2600HP 26" S-IPS LCD
Watercooling setup:
1st loop -> Radiator: 2 x ThermoChill PA120.3 | Pump: Laing DDC-3.25 with Alphacool HF 38 top | CPU: Swiftech Apogee XT | Chipset: Swiftech MCW-NBMAX | Tubing: Masterkleer 1/2" UV
2nd loop -> Radiator: ThermoChill PA120.3 | Pump: Laing DDC-3.2 with Alphacool HF 38 top | GPU: 2 x EK FC-6870 | Tubing: Masterkleer 1/2" UV
Assembled in Mountain Mods Ascension Trinity
Powered by Corsair Professional Series Gold AX1200
LOL - it's been a while since I saw somebody declaring a mobo "amazing" 'cause it does 3.4GHz with an Intel CPU...
3.4 is my initial overclock, the same chip wouldnt go above 3.15 stable on my last board. havnt measured the vdroop but its obvious the vcore is much more stable.... i'm having to use my old freezer pro7 as my swiftech kit hasnt arrived yet. considering i'm on air aswell i would consider the x38 chipset and the P5E mb in perticular to be good even amazing lol....LOL - it's been a while since I saw somebody declaring a mobo "amazing" 'cause it does 3.4GHz with an Intel CPU...
Last edited by purecain; 10-11-2007 at 10:08 AM.
Does the P5E have vdroop control in the BIOS??
Ultra Aluminus/Silverstone SUGO 05/Thermaltake SPEDO
Asus P6TD Deluxe/Zotac Mini-ITX GeForce 9300
Core I3 3ghz/Core i7 920 D0
TRUE Black/CM Hyper 212 Plus
G.Skill 4GB PC8500/3GB Corsair DDR3-1866/6GB G.Skill DDR3-2000
ATI HD4850 1GB/ATI HD4890 1GB/ATI HD5850
Samsung 305T Plus
Asus Xonar HDAV 1.3/Creative X-Fi PCI-E
4 Intel X-25M 80GB SSD RAID-0/Areca 1231ML
LG 8X Blu-Ray Burner/LG 10X Blu-Ray Burner/Sony Slimline Blu-Ray Optical
Ultra X3 1600W/Ultra X3 1000W
Posting Permissions
Reply With Quote
Bookmarks