Water Cooled Case Gallery

[Senater_Cache]

both could, and both should.

[Waterlogged]

CD, Has Tribal hooked you up yet, concerning that res?

[DarthBeavis]

CD, Has Tribal hooked you up yet, concerning that res?

CD also note what Tribal is working on for new editions of the spinners . . .gaskets:

http://forums.pcapex.com/project_wor...olution-7.html

[TheJollyFellow]

sorry to quote pics but that pump pushing the blue liquid looks like it could have the top inlet used instead...

great setup.

Using modded tops are pointless without the use of the top inlet--the 1/2" capability doesn't add any noticeable performance increase (see Cathar's testing in the sticky section). unless, of course, you just wanted a visual appeal...

[Sparky]

Using modded tops are pointless without the use of the top inlet--the 1/2" capability doesn't add any noticeable performance increase (see Cathar's testing in the sticky section). unless, of course, you just wanted a visual appeal...

I think that is what he was going for, looks good too.

[CyberDruid]

CD, Has Tribal hooked you up yet, concerning that res?

Thanks for asking.

T O has been great. He stands behind his work 110%: my kind of guy. He has sent a number of emails detailing his progress and basically rebuilt the entire reservoir saving only the coil. He reworked the base and the inlet outlet to better cycle the fluid and propel the coil inside the reservoir. I will be sure to post some shots of his improved reservoir.

@ Darth. Sounds great. But TBH I prefer fused acrylic...when done carefully it is unbeatable.

The Reservoir is a work of acrylic art. It has been a pleasure dealing with T O and I am actually looking into obtaining some of the RMAed spinners to have them repaired as T O said he would gladly repair them.

To my mind you can't expect any better service than that.

[BNDMOD]

This is my last proyect :d










More :d





Buy not.. More :d

[BNDMOD]

but i have some problems so.. i decided to modify to this :d more easy :p

[CyberDruid]

Yow...that one just sort of expanded to fill the best part of the room

How are the temps?

[BNDMOD]

Yow...that one just sort of expanded to fill the best part of the room

How are the temps?

30 to 33 idle with q66 @ 2.4Ghz with 1.25vcore in bios and 40-44 full load with 22 degrees celcius ambient....

[CyberDruid]

Sound like it's working. My B3 runs way hot on my P5K. Compared to a G0 on the DFI its almost 10C higher. Sounds like you have it dialed in.

[Dark Prodigy]

This thread is getting RUINED. Nice going.

[Waterlogged]

Thanks for asking.

T O has been great. He stands behind his work 110%: my kind of guy. He has sent a number of emails detailing his progress and basically rebuilt the entire reservoir saving only the coil. He reworked the base and the inlet outlet to better cycle the fluid and propel the coil inside the reservoir. I will be sure to post some shots of his improved reservoir.

Aye, 'tis be good news to hear.


I have no idea why I said that like a pirate.

[CyberDruid]

Pirate day was LAST MONTH. Don't ruin the thread man

[BNDMOD]

Sound like it's working. My B3 runs way hot on my P5K. Compared to a G0 on the DFI its almost 10C higher. Sounds like you have it dialed in.

look this comparation :d

SuperPi 1.5Mod - 32M Corriendo
Quad Q6600 B3 Vs Quad Q6600 G0



B3: 61-60-63-61 °C(SpeedFan is setting with 15ºC plus to give me the real temperature compre with Coretemp :d)
G0: 68-66-65-66 °C

Temp. Amb.: 21 °C aprox.

the refrigeration is the same...


the parts of the rig is in my sing :p

Of course both chips B3 and G0 run with the same vcore 1.55 @ 3.9Ghz @ 4 SuperPi 32m
I think this B3 is too cold as a G0 :d what dou you think?

[bundymania]

[CyberDruid]

Way cool. Nice photography too.

[CyberDruid]

me too

[ceemic]

bundymania, that red suits fine

[DarthBeavis]

bundymania, that red suits fine

Amen! Damn that is some uber Sexy redness going on there!!!!!!!

[disruptfam]

bundymania is this a re-post?? i remember seeing your rig awhile back...Still an awesome build

What's new???

[disruptfam]

what's that box next to your psu?

[bundymania]

Thx guys !
@disruptfam: yeah, i posted this rig already here, some time ago. I did some cable management and put the lights in the front and inside. the box is part of an old enermax psu, which i used to hide some of the "spaghettis" from the corsair psu

[ANP !!!]

@bundy, why do you always have to show up suddenly with ur ubercool rig pics and envy us to death

[bundymania]

next time, i´ll show my new Thermaltake 89 $ Kit in my megacool pink Walmart PC Case

i´m actually working on this for my new internet-pc, so stay stuned: