E2140 meets LN2 and results in a 151.51% OC (WR)

[Fr3ak]

You could have if you didnt fall asleep haha

[NightRaven]

Thanks Mark , ming@s and wedfighter

It's a shame more voltage didnt help. 503 is the absolute limit for me on that board. I will do some test with other mainboards and the single stage. Maybe a crazy PLL voltage, which is not available on the Gigabyte board, will help to reach a little higher FSB.

I was thinking about getting the DFI P35, but I wont be able to for wuite some time. Too bad that board aint cheaper :/

I was in a hurry when I swapped the mainboards and the temp probe slipped out. I dont think my CPU was much colder than -80C, so with a different board and more voltage, there might be room for improvement, but the FSB walls on those chips are crazy. Do you know if a BSEL mod helps? Booting at 333 FSB default might help, but I am not sure.

hmmm when i tested the 2140 it didnt boot at 1333fsb and that was with the mod so... MSI P35 plat and the p35 dq6 was the same - no boot.

i think the gigabyte is actually pretty okay.. even with the pll mod, it didnt really help. i did the mod and nopez.. didnt go higher. its really cpu from here i guess. anyway gigabyte unmodded is able to do really well already with dice and a 6550 i did 620fsb, the chinese are doing 670 on it! so dont think boards a prob but i could be wrong this time!

[angelicavoc]

Fr3ak : nice WR bro.....

[Fr3ak]

hmmm when i tested the 2140 it didnt boot at 1333fsb and that was with the mod so... MSI P35 plat and the p35 dq6 was the same - no boot.

i think the gigabyte is actually pretty okay.. even with the pll mod, it didnt really help. i did the mod and nopez.. didnt go higher. its really cpu from here i guess. anyway gigabyte unmodded is able to do really well already with dice and a 6550 i did 620fsb, the chinese are doing 670 on it! so dont think boards a prob but i could be wrong this time!

Thank you for that information. It kind of destroyed my hopes, but saved me a lot of work lol