ASUS Maximus Formula SE

**GLENBOY** · 10-05-2007, 03:09 AM

Originally Posted by BulldogPO

I took some photos:
http://picasaweb.google.fi/sunbulls/...mus_Formula_SE

does the watercooling block on the northbridge dismount from the board ok to fit into watercooling loop

**BulldogPO** · 10-05-2007, 03:22 AM

Yes, that Fusion block is "little" restrictive

But CPU temps are fine.

Damn, I cant get very high FSB,s but it must be this Q6600 B3.
I´m now driving it 8x450MHz.

**hornet** · 10-05-2007, 03:37 AM

Originally Posted by BulldogPO

Yes, that Fusion block is "little" restrictive

But CPU temps are fine.

Damn, I cant get very high FSB,s but it must be this Q6600 B3.
I´m now driving it 8x450MHz.

If you will use the fusion passive, the temperatures will be very high?

**CornerJack** · 10-05-2007, 03:48 AM

Originally Posted by hornet

If you will use the fusion passive, the temperatures will be very high?

I have use a sonde K that I placed in the waterblock and the temperature is of 60°C with just 1.5v and no bench...

**hornet** · 10-05-2007, 04:00 AM

Originally Posted by CornerJack

I have use a sonde K that I placed in the waterblock and the temperature is of 60°C with just 1.5v and no bench...

But you have the fusion block not wc, correct.

**CornerJack** · 10-05-2007, 04:09 AM

Originally Posted by hornet

But you have the fusion block not wc, correct.

Yes, waterblock passif... I make test with waterblock passif and after with watercooling

**hornet** · 10-05-2007, 04:13 AM

Originally Posted by CornerJack

Yes, waterblock passif... I make test with waterblock passif and after with watercooling

That was good, like this gave for verify itself really yields or not.

**~~T2k~~** · 10-05-2007, 06:48 AM

Originally Posted by hornet

Originally Posted by CornerJack

Yes, waterblock passif... I make test with waterblock passif and after with watercooling

That was good, like this gave for verify itself really yields or not.

Gee and I always say my English is far from being flawless... I have no idea what are you guys talking about...

**BulldogPO** · 10-05-2007, 07:29 AM

Same here

**WeaponX** · 10-05-2007, 09:06 AM

Hey... at least they're trying and if you think about it for more than a couple of seconds, you'll start to understand what they're trying to say.

Besides, English IS the most complicated language to learn and it's my third language.

**rabor** · 10-05-2007, 09:43 AM

Regular Asus Maximus Formula has just been added to Asus Global. So 2 more weeks?

No difference btw except for the heatsink..:

**~~T2k~~** · 10-05-2007, 11:03 AM

Originally Posted by rabor

Regular Asus Maximus Formula has just been added to Asus Global.

I see all the X38 boards listed there including Formula SE.

**865pe** · 10-05-2007, 11:28 AM

nice result

**Zulusman** · 10-05-2007, 12:38 PM

Thx for that commparasion...i was just wondering...
Thing is, that in .pl they got only Maximus non SE...and i need SE

Need to do small trip to .cz

**~~T2k~~** · 10-05-2007, 12:39 PM

Originally Posted by WeaponX

Hey... at least they're trying and if you think about it for more than a couple of seconds, you'll start to understand what they're trying to say.

I gave it more than a minute and I couldn't figure it out...

Besides, English IS the most complicated language to learn and it's my third language.

This is more than silly - it's just simply FALSE.
English IS NOT complicated AT ALL; in fact since it lacks any serious grammar it's rather EASY TO LEARN (at least basic level) in comparison with rest of the inflective Western languages (and let's not forget Asian ones are far more difficult for a Westerner.)

PS: I more or less speak two more besides English (and my native one) and currently learning the next and I don't consider myself a language genius, trust me.

**BulldogPO** · 10-05-2007, 11:12 PM

Finnish language is pretty complicated compared to anything

Back to bussiness:
My SupePi 1M time:

I just cant understand anything about those GTL and VTT voltage settings in bios, what they do?

**hornet** · 10-06-2007, 08:35 AM

My problems are resolved.

Asus Maximus Formula non SE.

**Zulusman** · 10-06-2007, 09:05 AM

@hornet
Dunno if the temps will change anyways...
I would prefere SE even without WC...

**Talonman** · 10-06-2007, 10:50 AM

I wish they made that block ready to be mated to a 1/2" hose.

Then it would have been purfect....

I have to believe that cutt's down flow quite a bit on a 1/2" system...

Does Fusion make a replacement block, the same size, made for 1/2" tubing. That would be killer..

**Dualist** · 10-06-2007, 03:20 PM

I read that release date for UK will be December

**Nuker_** · 10-06-2007, 04:25 PM

Here in sweden it will arrive on Monday, So I will probably have it on wednesday

**jagt** · 10-06-2007, 04:28 PM

I still can't decide if I should get this board or the P5E. Or wait for the Abit X38 Quad GT. Damn, why are the boards released to the public before reviewers?

**pinto** · 10-06-2007, 04:28 PM

here is my max frequency pi32 on Maximus

http://valid.x86-secret.com/show_oc.php?id=250862

**Nuker_** · 10-06-2007, 04:34 PM

Originally Posted by jagt

I still can't decide if I should get this board or the P5E. Or wait for the Abit X38 Quad GT. Damn, why are the boards released to the public before reviewers?

the maximus is better than the P5E for sure. the p5e has an aluminum heatsink.

**Zulusman** · 10-06-2007, 08:05 PM

I have ordered P5E becouse it was much more cheeper, but in Czechia, Maximus Formula SE is almost that same price that P5E in Poland for now.
I`m planing to buy stuff in Chechia next week, if they had it, if not, i`ll take P5E - not so big differance

Originally Posted by flaker

P5E (DDR2)

For voltage option..

VCORE : 1,1v to 2,4v (interval 0,00625v)
vPLL : 1,5v to 2,78v (interval 0,02v)
Vmem : 1,8v to 2,66v (interval 0.02v)
Vmch : 1,25v to 1,75v (interval 0,02v)

Thread: ASUS Maximus Formula SE

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions