Quad Core OC Database

[GripS]

Update:

I'll post an updated screen if i make it 8 hours. So far so good.

Special thanks to Dark79 for sharing his settings(that apparently work quite well!)

1.48v in BIOS. 1.43v load. What i like most is running @ 4:5 ratio on a P965 with a quad. Very cool.

Still using Air cooling (Scythe Infinity).

[CraptacularOne]

@ GripS, if you want me to add you to the list I'm going to need your FPO batch #

[GripS]

@ GripS, if you want me to add you to the list I'm going to need your FPO batch #

Heh.... You already have it bro. Just update my entry towards the bottom of the list.

[CraptacularOne]

Heh.... You already have it bro. Just update my entry towards the bottom of the list.

lol...sorry

[road-runner]

Q6600 GO @ 3402 Ghz
L726A855
TT Ultra 120 Extreme
1.55 bios set, 1.488 load
Gigabyte GA P35 DS3R

[ThePrutser]

@ GripS, if you want me to add you to the list I'm going to need your FPO batch #

Don't wanna be a nag, but don't ya need an 8 hour prime screenshot also? This screenshot shows 30 minutes only. I have seen entries denied with more details

[GripS]

Don't wanna be a nag, but don't ya need an 8 hour prime screenshot also? This screenshot shows 30 minutes only. I have seen entries denied with more details

Well... for this one 'technically' it doesn't need to be 8 hours. But i get your point. I actually killed that run after 4 hours and was shooting for 3.6ghz. I made it through 2 hours @ 3.6 before it rebooted on me . Gonna see if i can get away with upping the voltage a touch.

Updated screenshot with the prime95 run @ 4 hours(right before i killed it). Priming right now @ 3.6 with 1.5v in bios. So far @ 20 minutes.

[Fosco]

Q6600 GO @ 3708
L723A917
Water / Storm G4
1.48v load
PK5 Premium
1 hour smallFFT
OS = Vista 32bit

[sam95ta]

UPDATE

Q6600 GO @ 3.8
L726A849
http://valid.x86-secret.com/show_oc.php?id=253513
P5K E ( pencil mod)
Ultra 120 Extreme
1.50

[CraptacularOne]

updated

[pumbertot]

QX6850 G0 - L723A658 - 3.6Ghz P stable - D-Tek Fuzion WC- 1.36v - DFI LP P35 TR

[Supershanks]

1) Q6600 GO
2) FPO: L730B292
3) Cpu-Z Validation
4) 9x400 @4:5 1000

5) Water - D-Tek Fuzion
6) 1.375v (bios)
7) Asus P5k Deluxe

[Evil]

1) Intel Core 2 Quad Q6600 G0
2)L734A
3)http://valid.x86-secret.com/show_oc.php?id=255411

5)Watercooling- Swiftech Apogee
6)Vcore 1,475v in Bios
7) Asus P5K-E
Haven´t seen any results with this week but doesn´t look too bad. 24/7 is average but with 10c ambient and 1,625v vcore used ja managed to run 3dmark06 at 4052mhz which is a lot better than my old E6700.

[Viss]

1) Q6600 G0
2) L731B163
3) Tuniq Tower
4) Maximus Formula SE
5) Vcore bios 1.525 >> 1.42 windows load (load calibration doesnt work with this bios)

Wil update with validation, forgot to upload the file. Only one hour but for me thats more then stable



Idle:

[ThePrutser]

Nice oc! Do you also use it on 3.8, or was it only for the OC sake?

[h@RRy]

It is 3.7 Ghz 1.5V, strange is that I had to up the South Bridge voltage to 1.2v otherwise it was always failing after 1h20m.

The same EXACT thing has been happening to me I'm definitely gonna give this a shot

thx,
h

[CERO]

• Q6600 "g0"
• L726A951
• VID: 1.2875v
• P5K Deluxe [bios 0311]
• 3600mhz @ 1.408vcore prime stable Small FFTs 12h 40min
• Thermalright Ultra-120 Extreme [52-54c during load]
• Crucial Ballistix Pc6400 800mhz 4-4-4-12 [1:1 divider]

[Snake_Eyes]

I see many posts thats get 3,6 Ghz with a Q6600 and a P5K motherboard.
I have the Asus P5W DH Deluxe and i dont get the 3,4Ghz.
So does the P5K better overclock the Q6600 G0 than the P5W DH Deluxe ?
I got the same VID as you mc2k i have 1.2875v to..

[CERO]

I see many posts thats get 3,6 Ghz with a Q6600 and a P5K motherboard.
I have the Asus P5W DH Deluxe and i dont get the 3,4Ghz.
So does the P5K better overclock the Q6600 G0 than the P5W DH Deluxe ?
I got the same VID as you mc2k i have 1.2875v to..

I do think personally think the P35 would help for sure overclocking Quads. Altho I never owned a p965/975/i680, but I saw many people improved their O/c by going to p35, another thing all cpu are unique in their way of overclocking, and it seems there is no correlation with low VIDs and better O/c with the Q6600 g0, unlike those old famouse low vids E6600

[Snake_Eyes]

I do think personally think the P35 would help for sure overclocking Quads. Altho I never owned a p965/975/i680, but I saw many people improved their O/c by going to p35, another thing all cpu are unique in their way of overclocking, and it seems there is no correlation with low VIDs and better O/c with the Q6600 g0, unlike those old famouse low vids E6600

yeah i gonna beleave that my P5W DH does not get my Q6600 to 3,6Ghz.
i get it stable on 3,2 only 3,3 are stable to for 3dmark05 but 3dmark06 not
Prime are stable to on 3,3 but 3dmark06 not.
So i think 3,2 are the highed clock for my Q6600 i think.

But what i dont understand are the memory.
If i dont overclock and let it to 2,4 ghz i cant run my mem @ 4.4.4.11
All what i test doesnt boot (no bios screen)
If i set the mem to Auto (By SPD) than it boots but than are the mem @ 5.6.6.18.
But SPD in Everest Ultimate tells me a another timings and not the timing i get from the Auto (by SPD) 5.6.6.18..
So can you or some else explaine me something about that.
How i get 4.4.4.11 working on 2,4 default clock..

[CERO]

yeah i gonna beleave that my P5W DH does not get my Q6600 to 3,6Ghz.
i get it stable on 3,2 only 3,3 are stable to for 3dmark05 but 3dmark06 not
Prime are stable to on 3,3 but 3dmark06 not.
So i think 3,2 are the highed clock for my Q6600 i think.

But what i dont understand are the memory.
If i dont overclock and let it to 2,4 ghz i cant run my mem @ 4.4.4.11
All what i test doesnt boot (no bios screen)
If i set the mem to Auto (By SPD) than it boots but than are the mem @ 5.6.6.18.
But SPD in Everest Ultimate tells me a another timings and not the timing i get from the Auto (by SPD) 5.6.6.18..
So can you or some else explaine me something about that.
How i get 4.4.4.11 working on 2,4 default clock..

Hmz could be the board:X Or your ram is faulty. I would say if u got the money get a P35 and since ram is so dirt cheap, get some Crucial Ballistix Pc6400/8500 either is good for your wallet and put your mobo+ ram on sale. Those kingston arent really nice ram tbh:X

[jinu117]

1) Q6600 G0
2) Week: Once I am done testing... didn't bother taking picture -_-;
3) CPU-Z Validation : How do I do this?
4) Screen shot of it running at that speed (orthos, prime95..ect) 100% load
5) Phase change made by me. Tuned for best temp around 200W.
6) Voltage: 1.464v
7) Asus P5K-E. Stock no mod.
This is not end of it yet as it is in progress... but I am bit giddy with excitement Every 30 minutes-1hour is 5fsb up

[Viss]

Nice jinu117. If you have the chance could you please compare the max FSB for a superpi 1M run on air and with phase? Thanks.

About validation: open cpuz, choose "about" tab, choose validation. Save the validation file, go to cpuz website and upload it there.

[jinu117]

Nice jinu117. If you have the chance could you please compare the max FSB for a superpi 1M run on air and with phase? Thanks.

About validation: open cpuz, choose "about" tab, choose validation. Save the validation file, go to cpuz website and upload it there.

Air might have to wait for quite some time... This was actually done to test load condition comparison between 2 different system I built. I decided to start with lesser of 2... and still hitting at it. Right now working at 4.23ghz or so... at 1.56v. Looking at evap temp (CPU temp reads 0 all these time... kind of useless), and load capacity of this unit, I probably have another .3 to .4v to go up. (However, the oc amount for volt decreased significantly now... tops I probably will stop on this unit would be 4.25-4.3ghz...)
Than I will have to test another unit that can hold significantly more voltage. I would think up to 1.65v - 1.7v range. Once that is done, there are other cooling methods I am looking to test... However, quick air can't hurt at that time I guess since I will have to take off insulation for the other testings. FSB for max super pi... I will try that out before taking out this cooler for comparison purposes

[jinu117]

Well this is the final overclock for now on this cooler. Next voltage up requires more capacity than the unit can handle. For bench I am sure there are probably .1-.3v more someone can play with but I rather not crash this windows until all testing is done. Which hopefully I can test on next cooler with higher capacity. If I don't burn motherboard as it is quite high voltage range now.

1) Q6600 G0
2) Week: L727A856
3) CPU-Z Validation : http://valid.x86-secret.com/show_oc.php?id=258372
4) Screen shot of it running at that speed (orthos, prime95..ect) 100% load: into about 6-7 hours.
5) Phase change made by me. Tuned for best temp around 200W.
6) Voltage: Was set at 1.6125 in bios.
7) Asus P5K-E. Stock no mod.

So close yet so far from 4.3ghz