Project "XETM" - Worklog (56k Warning)

[disruptfam]

It's all packed back in my box, but will do tomorrow for you For now, i have 4 hours of sleep before doing a 11:30hs of work ... Will be back tomorrow night, dead tired. Maybe my first (And biggest) NCIX.com order will be there waiting for me when i get back!

thanks alot

cheers fam

[disruptfam]

i just realized that psu use's a different power cord than what we use in aus...

Can i just swap it out for say my old thermaltake 850w power cord??

cheers

[Patriote]

Big update! Check third post!

[Vice]

Sexi hardware pron...

I envy your bank account

[Patriote]

Sexi hardware pron...

I envy your bank account

You shouldn't! Envy my name and credit card, yeah

i just realized that psu use's a different power cord than what we use in aus...

Can i just swap it out for say my old thermaltake 850w power cord??

cheers

Not sure m8. Might want to ask some Aus* m8s.

BTW: Sorry, i didn't had tim to un-pack my PSU to take dimensions. My job is killing me. But im sure you can find such infos on Ultra's site or in any review of the PSU

[disruptfam]

Not sure m8. Might want to ask some Aus* m8s.

BTW: Sorry, i didn't had tim to un-pack my PSU to take dimensions. My job is killing me. But im sure you can find such infos on Ultra's site or in any review of the PSU

that's kool ur busy that's understandable...Your room look's sik...I rekon you could use a new chair like a nice big leather one...Your got 2 gtx right are you getting a big monitor? say a 30inch to give them cards enough work...

[Patriote]

that's kool ur busy that's understandable...Your room look's sik...I rekon you could use a new chair like a nice big leather one...Your got 2 gtx right are you getting a big monitor? say a 30inch to give them cards enough work...

Check the first thread I have ordered a 24" Dell!

Yes, my chair sucks. That was in my plans to change it!

[disruptfam]

Check the first thread I have ordered a 24" Dell!

oh ok lol

[shazza]

Congrats on all the stuff arriving, Patriote.

i just realized that psu use's a different power cord than what we use in aus...

Can i just swap it out for say my old thermaltake 850w power cord??

Shouldn't be a problem ... just verify that its a dual voltage PSU (I think most are), and that your plug fits. I moved back to the US from Australia last Dec., and I did just what you're planning with my desktop. It worked fine.

[Patriote]

Third post updated with more pics

[Patriote]

Quick update : I have placed an order @ Jab-Tech for a PA120.2 ... The damn sucker was out of stock @ NCIX.com and i can't wait for it to be back in stock. It has been back-ordered @ NCIX.com for my order so i am asking for refund. The rest of my second order from NCIX.com is already shipped

[Lunchbox21984]

dude, that is going to be one killer system. and i have to agree with you on ultra psu's back in the day, they were not the best. but i have to say now, they are coming along pretty good. ive recently bought a Ultra Xfinity 600watt for my back-up system and it powers everything i have in it. so yes, they are getting alot better. ive got a few friends that have the tarantula keyboard and they seem too like it. havent heard them complain about the keys yet, guess you might have gotten one that didnt get tested all the way.

keep up the good work man, looking good with the parts, waiting to see what it looks like in the case.

just curious is that your old case down beside your desk or is that a back-up system.

[Patriote]

dude, that is going to be one killer system. and i have to agree with you on ultra psu's back in the day, they were not the best. but i have to say now, they are coming along pretty good. ive recently bought a Ultra Xfinity 600watt for my back-up system and it powers everything i have in it. so yes, they are getting alot better. ive got a few friends that have the tarantula keyboard and they seem too like it. havent heard them complain about the keys yet, guess you might have gotten one that didnt get tested all the way.

keep up the good work man, looking good with the parts, waiting to see what it looks like in the case.

just curious is that your old case down beside your desk or is that a back-up system.

It's my rig ATM. The one i am using to type this. It'll be teared apart for my new build. The P5B Deluxe and E6600 in it will be for my second rig Crunching 24\7 for XS Since it'll be my second rig, i plan on selling my second Crunching rig i have ATM which is an AMD s939 X2 4800+, Corsair 3500LL, Lexa case, Asus A8N32-SLI Deluxe.

Yeah, i have been reading, it seems that i am not the same one to have got such problem with the keyboard. I read a reply somewhere where a guy would have the same exact problem... He said he RMAed the keyboard and got a new one which he said was all fine. I have asked Xoxide.com to pay shipping and they don't want to. So that makes 130-140$ for that freaking keyboard... Anyway, i am asking them to test the new keyboard they'll send me so i don't end up with the same cr@p.

Thanks for the kind words BTW Keep your eyes on the thread, lots of work is coming! If luck is on my side, no problems or anything will encounter my project so all should be completed in 2 weeks or so. Still, the Thread has been viewed near 1800 times already and the work did not even started yet!

[septim]

2 dell 24" should be enough work...

[sergers]

i would have just bought the keyboard from ncix, same price.

but build looks great so far.

[Patriote]

2 dell 24" should be enough work...

Can you borrow me the 750$ for the second Dell 24" ?

[sergers]

I have been contemplating buying the 24IN...

I could purchase 2x 22IN for less than a 24IN, but I rather have 1 larger screen than dual screens.

let us know how it looks

[septim]

not really, i am still using a CRT atm...

too bad about the keyboard though...

i envy you have the parts... i don't envy your credit card though...

*afk again back to work time...

[Lunchbox21984]

yeah, but that things is going for a good cause though. many more nights of gaming FUN . ive done the same thing and still paying off mine, but it was worth it.

[IREWolfman]

Whats the Tuniq tower for?

[septim]

so that when he puts his mobo on top of the tech station, the cpu is goin on air for a while, while he works on his case, most likely...

[bulledeaux]

hi james

es mais c'est quoi ton delire la ?

tien sinon regarde ca :

http://www.cooling-masters.com/forum...utoniiium.html

[Jedda]

Great thread, Patriote!


Disrupfam
I think its 150mm square and definitely dual input voltage.
AC Input Voltage: 115V/230V
AC Input Frequency: 50-60Hz
AC Input Currents:
· 13A (RMS) for 115VAC input
· 8A (RMS) for 230VAC input
Sure tempting at 1000watt. The 620 Corsair has the same leads for all it's modular leads but not the 24-pin etc. Might have to consider this psu in the future myself. Ouch $360au by the time it arrives. Still comparable with others here and with none fully modular 1000 units here.

[Patriote]

i would have just bought the keyboard from ncix, same price.

but build looks great so far.

It wasn't in stock.

I have been contemplating buying the 24IN...

I could purchase 2x 22IN for less than a 24IN, but I rather have 1 larger screen than dual screens.

let us know how it looks

Same here. I wanted a res up, so a 24" was definitely my next buy.

yeah, but that things is going for a good cause though. many more nights of gaming FUN . ive done the same thing and still paying off mine, but it was worth it.

Exactly!

so that when he puts his mobo on top of the tech station, the cpu is goin on air for a while, while he works on his case, most likely...

You got it all right buddeh! + I change parts so often and sometimes i need to work with parts for customers etc... So that Bench table with the Tuniq was a good buy

hi james

es mais c'est quoi ton delire la ?

tien sinon regarde ca :

http://www.cooling-masters.com/forum...utoniiium.html

lol T'imagine les couts de transport de la France? Non Merci!

[bulledeaux]

vi