[MemoryReaction] CellShock 2x1GB PC2-8000C4

[Solarfall]

well the i only runned the 603mhz (4-4-4-9 2T) with superpi ( didnt really get to the proper testing phase with that cos of the psu ) 1M.. the 500mhz with 4-3-3-9 latency's i was able to pass superPi 32M.

[Brother Esau]

well the i only runned the 603mhz (4-4-4-9 2T) with superpi ( didnt really get to the proper testing phase with that cos of the psu ) 1M.. the 500mhz with 4-3-3-9 latency's i was able to pass superPi 32M.

What test bed are you running you're Cell Shock in 680i? I see some very impressive results there are they in P35 with that Vdimm and clocks I ask because if thats in the D.F.I P35 is that Blend stable at those Voltages? I pass Memtest 1.70 with flying colors but prime Large FFT Pass without issue but blend fails in minutes Even took out the Q6600 G0 and put in E6600 and still same deal Raja , Praz, are getting Identical results, one stick goes Balls to the Wall but add the second and Blend does not want to pass unless at very HIGH Vdimm so I know its not just me seeing how the D.F.I Testing Crew is directly involved

[EnJoY]

It is quite common for Memtest to pass where Prime will still fail. Memtest is only the beginning of stability testing, Prime tells the true tale in the end. Unfortunately, it sounds like you have one stick that is much weaker than the other. You may want to try swapping around the sticks in the slots, sometimes placing a weaker stick closer to the CPU can actually assist in it's clocking abilities.

[Brother Esau]

Hey, Alex whats up? Memtest yea I know about that but thank you regardless

Well I have a 680i system thats brand new that I built to sell so I am just formating Winblows as we speak and I have installed the Cell Shock in that in hopes to find If there is a problem that resides in the Ram itself (could be) but that I will find out shortly and see if the best Ram Overclocking Board will allow me to see what these sticks have to offer

[saaya]

It is quite common for Memtest to pass where Prime will still fail. Memtest is only the beginning of stability testing, Prime tells the true tale in the end. Unfortunately, it sounds like you have one stick that is much weaker than the other. You may want to try swapping around the sticks in the slots, sometimes placing a weaker stick closer to the CPU can actually assist in it's clocking abilities.

if memtest passes and prime fails the chipset is usually the problem and not the mem, thats at least the experience i made. try more chipset volts and make sure the nb is cooled, play with other board voltages... maybe that helps

[Brother Esau]

Sascha anymore reports on Ram problem with DFI P35 coming in?