Is there any MemSet which supports Windows Vista x64 so far...need such a Tool...even if it's only to read out the "Auto" Subtimings
Is there any MemSet which supports Windows Vista x64 so far...need such a Tool...even if it's only to read out the "Auto" Subtimings
no ideas?
FELIX please add support ATI Radeon Xpress 200
->flips: Vista64 require signed driver for work, and the driver I use with
memset (TVicPort) is unsigned for now; it's the raison that Memset
work on Vista32 and not Vista64.
->Sard: I need datasheet for do that and ATI don't allow access to these infos.
PM me...I may be able to get it for youOriginally Posted by FELIX
s7e9h3n
Help please
...updated version: memset
work on Vista 64.
I'm still waiting on the specs
@ Felix... Thumbs Up!
It works on Vista x64, the only problem is that the frequency is not shown, but that's a pity!
I'll try if this version recognizes the changes and set them...Tras worked...but on TRC my system crashed, maybe it's my memory
What is your system?
Added it to my Signature!
Very nice, but it does not work on the ASUS M2N32SLI DELUXE. The values are just greymarked and can't be changed...
Ivy Bridge 3770K @ ????MHz
6c Intel Xeon X7460 24MB cache 16GB RAM 22TB HDD fileserver
Dual Intel Xeon E5620 workstation
SB 2600K @ 5016MHz 1.37v HT on AIR primestable
AMD Athlon X3 425 @ B25 4GHz+ AIR
AMD Athlon X2 6400+ @ 3811MHz AIR
AMD Athlon X2 3600+ @ 3200MHz AIR
AMD Athlon XP 1700+ @ 2714MHz AIR
Thermalright Ultra-120 Extreme
Corsair 8GB XMS3 2000MHz
ATI Radeon HD5850 @ 1000MHz+/1200MHz+
Windows 7 Enterprise x64
Corsair HX750W
...I just send you a PM.
I add some timings for K8/K10 DDR2 on this version
Note that it's a "read only" version, not possible to apply for now.
If you can make some screen it's welcome, I need to check some values.
heres a screen of l1n64 with 1 cpu if you can add drive strenths and other timings like systool you'll have the complete package
Amd Nvidia/Ati -3dmark06 scorebord revisted
asus L1N64-ws or /b depending on bios chip
4x1gig 8500 gkill bpk
2x opteron 8224 @ 3.8ghz
http://www.xtremesystems.org/forums/...&postcount=236
vga= 8800gt
winxp pro
custom chiller -31 water
2x dtek fuzions
bix3-with x3panaflo hi output
antec 850 quattro
heat under msimax abitmax and dfimax
Amd Nvidia/Ati -3dmark06 scorebord revisted
asus L1N64-ws or /b depending on bios chip
4x1gig 8500 gkill bpk
2x opteron 8224 @ 3.8ghz
http://www.xtremesystems.org/forums/...&postcount=236
vga= 8800gt
winxp pro
custom chiller -31 water
2x dtek fuzions
bix3-with x3panaflo hi output
antec 850 quattro
heat under msimax abitmax and dfimax
Glad to see the author of one of my favorite tools back hereI add some timings for K8/K10 DDR2 on this version
Note that it's a "read only" version, not possible to apply for now.
If you can make some screen it's welcome, I need to check some values.
OK, it's cause Dev ID is not the same that K8;
updated on this version: memset
Chipset is not important with K8/K10, cause the memory controller is in the CPU.
New version for read and write: memset34beta3
-Add timings on K8 DDR2.
-Add support for K10 DDR2.
Let me know if you find bugs or others...
Last edited by FELIX; 10-20-2007 at 04:22 AM.
Felix thanks for the utility,it's very useful
Do you plan to add support for drive strength adjustments in future(especially on RevG Brisbanes and future K10?)
so felix, my friend, this will work for me?
Normaly it's work on read and write; tell me the result...
For dual channel detection, I don't know how to acces a specific register.
->informal: I try to add Data and Clock drive strength in final version.
Felix - You never cease to amaze....
nice work felix. keep it rolling.. hehe.. thx felix
Posting Permissions
Reply With Quote
Bookmarks