**Official DFI LanParty UT P35-T2R Review/Overclock/Guide Thread**

[eva2000]

Just flashed from 8/23 to 9/13 official bios and starting to do some 2:3 (266/800) divider tests of the new memory related options to see what they bring to the table

I'll be using Everest Ultimate 4.10.1128 Beta and Super Pi v1.50 32M test for the comparisons.

Comparison Results

• 500Mhz 4-4-4-12 / all AUTO T2 Dispatch = Disabled = 15:58.547
• 500Mhz 4-4-4-5 / A-25-A-plA-A-11-10-AA-454-AA T2 Dispatch = Disabled = 15:51.281
• 500Mhz 4-4-4-5 / A-25-A-plA-A-11-10-AA-454-AA - EDT = Fast EA = Auto T2 Dispatch = Disabled = 15:50.469
• 500Mhz 4-4-4-5 / A-25-A-plA-A-11-10-AA-454-AA - EDT = Turbo EA = Auto T2 Dispatch = Disabled = 15:50.562
• 500Mhz 4-4-4-5 / A-25-A-plA-A-11-10-AA-454-AA - EDT = Auto EA = Auto T2 Dispatch = AUTO = 15:50.422
• 500Mhz 4-4-4-5 / A-25-A-plA-A-11-10-AA-454-AA - EDT = Auto EA = Fast T2 Dispatch = Disabled = 15:50.265
• 500Mhz 4-4-4-5 / A-25-A-plA-A-11-10-AA-454-AA - EDT = Turbo EA = Fast T2 Dispatch = Disabled = 15:46.594
• 500Mhz 4-4-4-5 / A-25-A-plA-A-11-10-AA-454-AA - EDT = Turbo EA = Fast T2 Dispatch = AUTO = 15:46.594

click image to see bios settings used as well.

[Chanana]

thx esau
with those configs i can get up to 3.09 ghz (9x343)with stock cpu cooler... with 1.4v for CPU and 2.1v for memories (is it too much?)
i would like to push it to 3.2
any other recommendations?
and i will appreciate the right config for my memories...
i certainly read all this cas stuff but its hard to understand... mine is CAS4 800mhz
thx so much....
and if u could tip me on those programs u guys use to test memory, cpu or setup memory and etc...
and 1 more thing... i just checked my settings with cpuz and it appears that my core speed is 2.06ghz (343x6) when in my computer properties says @3.09 whats wrong?
oh wait its changing... goes to x9 and x6 on and off????????
sorry i ask all this questions... im a noob in this stuff (where can i download smart guardian? i have win vista)

[Brother Esau]

thx esau
with those configs i can get up to 3.09 ghz (9x343)with stock cpu cooler... with 1.4v for CPU and 2.1v for memories (is it too much?)
i would like to push it to 3.2
any other recommendations?
and i will appreciate the right config for my memories...
i certainly read all this cas stuff but its hard to understand... mine is CAS4 800mhz
thx so much....
and if u could tip me on those programs u guys use to test memory, cpu or setup memory and etc...
and 1 more thing... i just checked my settings with cpuz and it appears that my core speed is 2.06ghz (343x6) when in my computer properties says @3.09 whats wrong?
oh wait its changing... goes to x9 and x6 on and off????????
sorry i ask all this questions... im a noob in this stuff (where can i download smart guardian? i have win vista)

@Chanana......this will get you what you want at first but.....Make a signature so we know what hardware you have!



CPU Feature
- Thermal Management Control: Disabled
- PPM(EIST) Mode: Disabled
- Limit CPUID MaxVal: Disabled
- CIE Function: Disabled
- Execute Disable Bit: Eabled
- Virtualization Technology: Enabled
- Core Multi-Processing: Enabled

Exist Setup Shutdown: Mode 2
CLOCK VC0 divider: AUTO
CPU Clock Ratio Unlock: Enabled
CPU Clock Ratio: X 8
- Target CPU Clock:
CPU Clock: 400
Boot Up Clock: Auto
DRAM Speed: 333/667
- Target DRAM Speed: 800 MHZ
PCIE Clock: 100mhz

Voltage Settings
CPU VID Control: 1.325v
CPU VID Special Add: Auto
DRAM Voltage Control: 2.0v
SB 1.05V Voltage: 1.070v
SB Core/CPU PLL Voltage: 1.55v
NB Core Voltage: 1.40v
CPU VTT Voltage: 1.33v
Vcore Droop Control: Disabled
Clockgen Voltage Control: 3.45v
GTL+ Buffers Strength: Strong
Host Slew Rate: Weak
GTL REF Voltage Control: Enabled
x CPU GTL1/3 REF Volt: 90
x CPU GTL 0/2 REF Volt: 90
x North Bridge GTL REF Volt: 94

DRAM Timing
- Enhance Data transmitting: Fast
- Enhance Addressing: Fast
- T2 Dispatch: Disabled (Disable for better memory stability)

Clock Setting Fine Delay
Ch1 Clock Crossing Setting: Aggressive for better performance, Relax for stability
- DIMM 1 CLK fine delay: Current (increasing delay by 1 or 2 & decrease Command/Control delay by 1 or 2 may help 1T/2T oc'ing)
- DIMM 2 CLK fine delay: Current
- Ch 1 Command fine delay: Current
- Ch 1 Control fine delay: Curent

Ch2 Clock Crossing Setting: Aggressive for better performance, Relax for stability
- DIMM 3 CLK fine delay: Current (increasing delay by 1 or 2 & decrease Command/Control delay by 1 or 2 may help 1T/2T oc'ing)
- DIMM 4 CLK fine delay: Current
- Ch 2 Command fine delay: Current
- Ch 2 Control fine delay: Curent

Ch1Ch2 CommonClock Setting: Auto

Ch1 RDCAS GNT-Chip Delay: Auto
Ch1 WRCAS GNT-Chip Delay: Auto
Ch1 Command to CS Delay: Auto

Ch2 RDCAS GNT-Chip Delay: Auto
Ch2 WRCAS GNT-Chip Delay: Auto
Ch2 Command to CS Delay: Auto (where cpuz sees 1T or 2T SETTING)

CAS Latency Time (tCL): 4
RAS# to CAS# Delay (tRCD): 4
RAS# Precharge (tRP): 4
Precharge Delay (tRAS): 12
All Precharge to Act: AUTO
REF to ACT Delay (tRFC): AUTO
Performance LVL (Read Delay) (tRD): AUTO

Read delay phase adjust: Enter
- Channel 1 Phase 0 Pull-In: Auto (each Phase when enabled = (Common tRD - 1)
- Channel 1 Phase 1 Pull-In: Auto
- Channel 1 Phase 2 Pull-In: Auto
- Channel 1 Phase 3 Pull-In: Auto
- Channel 1 Phase 4 Pull-In: Auto

- Channel 2 Phase 0 Pull-In: Auto
- Channel 2 Phase 1 Pull-In: Auto
- Channel 2 Phase 2 Pull-In: Auto
- Channel 2 Phase 3 Pull-In: Auto
- Channel 2 Phase 4 Pull-In: Auto

MCH ODT Latency: AUTO
Write to PRE Delay (tWR): AUTO
Rank Write to Read (tWTR): AUTO
ACT to ACT Delay (tRRD): AUTO
Read to Write Delay (tRDWR): AUTO
Ranks Write to Write (tWRWR): AUTO
Ranks Read to Read (tRDRD): AUTO
Ranks Write to Read (tWRRD): AUTO
Read CAS# Precharge (tRTP): AUTO
ALL PRE to Refresh: AUTO

PCIE Slot Config: 1X 1X
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
SATA Spread Spectrum: Disabled