3.4ghz 333/667 All you need to do is set you're Vcore around 1.32v Raise NB vcore 1.45v
CPU VTT 1.35 disable vdroop control Enable GTL ref voltage leave at 94-94-100 set primary memory timings and do a bunch of reading and then do allot more reading after that!
Keep in mind those voltage settings "should" get you going but.......everything goes by individual Hardware basis and no guarantees what works for me or anyone else will work for you! You also may find that you're processor does not need that much vcore or it may need quite a bit more and only you will know when you try!
Reply With Quote
Bookmarks