I will try EIST again, but the first time resulted in freeze at boot. That was with an 8 multi.Originally Posted by Master of None
Thanks, will do.
I will try EIST again, but the first time resulted in freeze at boot. That was with an 8 multi.
Thanks, will do.
░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ Intel i7 3770k
░░░░░░▄▄▄▄▀▀▀▀▀▀▀▀▄▄▄▄▄▄░░░░░░░░░ ASUS GTX680
░░░░░░█░░░░▒▒▒▒▒▒▒▒▒▒▒▒░░▀▀▄░░░░░ ASUS Maximun V Gene
░░░░░█░░░▒▒▒▒▒▒░░░░░░░░▒▒▒░░█░░░░ Mushkin 8GB Blackline
░░░░█░░░░░░▄██▀▄▄░░░░░▄▄▄░░░█░░░░ Crucial M4 256GB
░░░▀▒▄▄▄▒░█▀▀▀▀▄▄█░░░██▄▄█░░░█░░░ Hitachi Deskstar 2TB x2
░░█▒█▒▄░▀▄▄▄▀░░░░░░░░█░░░▒▒▒▒▒█░░ FSP 750W Gold
░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ Fractal Arc Mini
Yeah, I've noticed windows doesn't boot if you turn on EIST and C1E with anything but the max multiplier.I will try EIST again, but the first time resulted in freeze at boot. That was with an 8 multi.
Thanks, will do.
Even with the max multiplier I get a lock up when the PC is at desktop.Running 9x400 with 1.52 set in BIOS. (load stable at 1.42)
░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ Intel i7 3770k
░░░░░░▄▄▄▄▀▀▀▀▀▀▀▀▄▄▄▄▄▄░░░░░░░░░ ASUS GTX680
░░░░░░█░░░░▒▒▒▒▒▒▒▒▒▒▒▒░░▀▀▄░░░░░ ASUS Maximun V Gene
░░░░░█░░░▒▒▒▒▒▒░░░░░░░░▒▒▒░░█░░░░ Mushkin 8GB Blackline
░░░░█░░░░░░▄██▀▄▄░░░░░▄▄▄░░░█░░░░ Crucial M4 256GB
░░░▀▒▄▄▄▒░█▀▀▀▀▄▄█░░░██▄▄█░░░█░░░ Hitachi Deskstar 2TB x2
░░█▒█▒▄░▀▄▄▄▀░░░░░░░░█░░░▒▒▒▒▒█░░ FSP 750W Gold
░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ Fractal Arc Mini
Well your overclock is affecting that. I'm talking about having the CPU @ stock speeds but a different multiplier ex.) 8x300 =2.4 but unstable with C1E & EISTEven with the max multiplier I get a lock up when the PC is at desktop.
If you run EIST and manually drop the multiplier strange things can happen.
I run both EIST and C1E enabled on both my IP35 Pro and AW9D Max. Both Dual Core processors are heavily overclocked and will pass a round of Orthos. Both overclocks were established and tested with EIST and C1E enabled.
I know others run both enabled with overclocked Quads, if you get freezes at the desktop my guess is you aren’t running enough Vcore.
Axelia - AX78; 9500 Phenom; 2 x 2GB G.Skill PC2 8000; OCZ 450 ModStream; 250GB WD; Sapphire HD 3450; Thermalright Ultra-120; 239 x 10.5 = 2.5GHz
Andrea - AW9D Max; E6600; 2 x 2GB G.Skill PC2 8000; Enermax 495; 2 x 80GB Hitachi’s RAID 0; MSI 8500GT; Thermalright Ultra-120 Extreme; 378 x 9 = 3.4GHz
Ipo - IP35 Pro; E4400; 2 x 1GB G.Skill PC2 8500; Corsair VX550; eVGA 7600GS; Thermalright Ultra-120 Extreme; 320 x 10 = 3.2GHz
Idonia - IP35-E; E2140; 2 x 1GB G.Skill PC2 6400 HK; OCZ 450 ModStream; eVGA 7600GS; Lian-Li PC-52; XP MCE/SUSE 10.3; 400 x 8 = 3.2GHz
Stockard - NF-95; 3200+ Venice; 2 x 1GB OCZ PC3200 Platinum; XP MCE; 240 x 10 = 2.4GHz…That’s NOT Stock anymore! – Now my Wife’s
Snowball-2 - AN8 Ultra; 3200+ Venice; 2 x 512MB OCZ PC4000 Gold R2; Thermalright XP-90; GeCube x600; FSP 450; 250 x 10 = 2.5GHz – Now my Son’s
Cary - NF8; 3400+ ClawHammer; 2 x 512MB OCZ PC3500ELDC Gold; XP-90; FSP 400; 219 x 11 = 2.4GHz - Now my Mom’s
Oh how I hate the squealing sound my mobo makes when I run Prime95 blend test, luckily it only hits in during 8-12K(?) FFTs and then fades away, and even then it's not squealing non-stop but varies a lot. Strangely it doesn't occur during the small or large FFTs tests. Or at least I hope it's my mobo as I'm going to get rid of it anyway...
Hey guys can someone please explain the memory dividers with this board? I'm used to seeing the typical 1:1, 4:5, 4:3, 2:3 etc. options in the bios.
So if I'm running 425x9=1700fsb (3825mhz) and my ram is PC8500 what option should I be setting in the bios to get my 1066? Sorry for the confusion
EIST wont work if you change multiplier, like knight stated.I will try EIST again, but the first time resulted in freeze at boot. That was with an 8 multi.
Thanks, will do.
C1E works fine with diffrent multis, unless your going for high FSB, then its a crapshoot.
C1E will help keep the cpu cooler though for your daily driver settings
~
Posting Permissions
Reply With Quote
Bookmarks