**Official ABIT IP-35 Pro Review/Overclock/Guide Thread**

[Ace-a-Rue]

Originally Posted by Ace-a-Rue
i guess it primes now without any problem...right?

Right.

if you ever go back to a raid setup, try increasing your vcore (actual) up to the max if you're running a default overclock...also, increase the ICHIO 1.5 up to around 1.65-1.70v range; vdimm to around 2.2-2.3v and MCH to around 1.44v.

you don't need to stay there very long...this is to verify if those voltage increases make it stable in raid....if it is stable...then back only one thing down per each instance you run the stress program...this is where Uguru pays off in big dividends...you can do all the adjusting from windows

usually freezes occur when the system is significantly under voltage in one or more categories, or you have a major defect in a piece of hardware.