Water Cooled Case Gallery

[trouble2000]

It is ac ryan black acrylic. The sata cables are these one: http://www.revoltec.de/english/produkte/rc049.htm 1st on that list.

[lazy]

kingfearon:

yep

[disruptfam]

It is ac ryan black acrylic. The sata cables are these one: http://www.revoltec.de/english/produkte/rc049.htm 1st on that list

What did ya use to cut the acrylic dremel?

Do you mind if i copy ur idea but with blue panels?

[trouble2000]

It was the store where I buy some of my stuff that did the cutting, so i really don't know how it was cutted :|

You can copy all that you want

[DarthBeavis]

trouble me fav shot is the one with ur kid!!!! teach em young

[Waterlogged]

What did ya use to cut the acrylic dremel?

Do you mind if i copy ur idea but with blue panels?

Your probably gonna hate me for this but...you could probably use your jigsaw for that. Dremel will melt it pretty good at any RPM.

Best bet would be bandsaw or some sort of circular saw (table or portable) with high tooth count blade (80-100+).

[Patriote]

I err...whats after quadruple

It's "quintuple"

[Malik]

Last revision with this stuff:











New blocks on way

[-=Cobra=-]

very nice and clean setup..keep it up..

[tiro_uspsss]

It is ac ryan black acrylic. The sata cables are these one: http://www.revoltec.de/english/produkte/rc049.htm 1st on that list.

schweeeet! thanks bro!

[disruptfam]

Your probably gonna hate me for this but...you could probably use your jigsaw for that. Dremel will melt it pretty good at any RPM.

Best bet would be bandsaw or some sort of circular saw (table or portable) with high tooth count blade (80-100+).

Lol so i should keep my jigsaw then? I'm still going to purchase that angle grinder you recomended only 40dollars with postage very cheap.

I need to cut through my lian li alu panels some modders mesh and acrylic will these 3 tools all i need,dremel,jigsaw,angle grinder?

cheers

[step]

What did you use to cut the side panels? I'm afraid that the dremel might melt the alu at any rpm, that is unless you've had success with it?

[Waterlogged]

Lol so i should keep my jigsaw then? I'm still going to purchase that angle grinder you recomended only 40dollars with postage very cheap.

I need to cut through my lian li alu panels some modders mesh and acrylic will these 3 tools all i need,dremel,jigsaw,angle grinder?

cheers

For most simple things, yea, that's all you'll need. From what I can find on the webs, you should get some 10-20 tooth count blades (looks like thin kerf) for the JS to use on the Acrylic.

What did you use to cut the side panels? I'm afraid that the dremel might melt the alu at any rpm, that is unless you've had success with it?

Dremel won't melt Alu.

[Spacemaster]

This is latest from SX-team

[Origin_Unknown]

Mr. Sulu bring both Nacel's upto full power

[emaniac]

@ spacemaster : you bought that ugly case, afterall
red is sooo better then that boring, so common blue

ps. kad postujes ovo na bench?

[Spacemaster]

@ spacemaster : you bought that ugly case, afterall
red is sooo better then that boring, so common blue

ps. kad postujes ovo na bench?

Thanks mate!
P.S
Na bench necu jos kaciti, jer Deki treba da okaci tekst neće nigde da pobegne, ali imas to i ovde
http://www.sx-team.com/forum/index.p...st=0&#entry781
http://forum.pcekspert.com/showthrea...374#post817374
http://si.hwstation.net/forum/viewtopic.php?t=19

[emaniac]

thanx !
i see, you choped case a little bit...

[Spawne32]

Mr. Sulu bring both Nacel's upto full power

helm bring us about full, plot a course, maximum warp, engage!

[The_Beast]

SX-team did a nice job on the case but I think the rads stick out too far

[Gioz]

This is latest from SX-team

i think it's wonderful,very nice job.

[Spacemaster]

For more pictures http://www.sx-team.com/forum/index.p...st=0&#entry808
Thanks mates for critics.

[nugzo]

For more pictures http://www.sx-team.com/forum/index.p...st=0&#entry808
Thanks mates for critics.

Good job man. Nice work!



I just finished re-doing mine. Here is the old


And now for the new. I get bored quickly with my case. I did the white lights a few times back and my friends recommended i go back to that look. Here it is......... Let me know which you like best please.
The 3 led fans in the external are actually white as well, they kinda look blue in the pics.

[Dark Prodigy]

I really want to like your build nugzo, but those pics are just too close up to get a good look at it. Some nice overall, non-angled shots would be alot better to ascertain what your build truly represents.

[iadstudio]

nugzo, what is your loop order? Where are the 2 pumps in the order?

Nice build though. I like the look.