Im having problems too with geting my Quad G0 stable, but a lot of thing changed when I set FSB voltage to 1.3v not 1.4v and 1.5v, yesterday I was taking way to get stable 425FSB and it was successful, before with high FSB I was able to get 400 x 9, but it was not posible even boot at 430 - 440 FSB, now with lower FSB voltage I can boot fine with 450FSB or more in bios.

Yesterday testing gave me 425 x 8 = 3400 Mhz and it was set with 1:1 momery @ 850 Mhz 4-4-4-8 2T! Got it 8+ hours Quad Prime stable A lot of voltage tweak is needed and every board acts differently, 425 FSB will be tested with 9x multi today, hope my board can do Prime on 450FSB with Quad

And by the way here is my max CPU validation on water, not too bad - 4.3Ghz from 2.4Ghz And it looks like its boards limit, as 480FSB on Quad and 680i is very high. Must get 500FSB posible Quad board for testing this more When I will get it for 24/7 then I wil try to get few more Mhz, vdrop mod will be done too. Now the limit is free time for all this!


http://valid.x86-secret.com/show_oc.php?id=241580