Thanks for replying Reinvented and icon57. I posted in G0 OC thread as well because that thread gets visited much more frequently.
Anyway it is G0, batch 720B080. I can do 3.3 Ghz with really low voltages:
Vcore: 1.325v
VFSB: Auto/1.4v
Memory: 2.0v
SPP: Auto/1.4
MCP: Auto/1.5
MCP-SPP: Auto/1.2v
It's all very weird because I needed to set all those voltages at 1.5v for E4300 in order to get it stable at 3.3 Ghz. I did VDrop mod before this Q6600 was instaled.
I follow this and G0 OC thread from beginning and as far as I can see different people say different things,regarding these voltages.
I remember that guy with all the voltages at auto except for Vcore and Mem (NoSoMo I think) ,and also there are those that have set their voltages to something like:
1.55v for SPP
1.65v for MCP
1.55v for SPP-MCP
1.5v for VFSB
I have tried both settings and many in between,but everything else except for AUTO fails Prime pretty quickly.AUTO settings will give me couple of hours to a day of stability.
Temps shouldn't be a problem,case is ventilated properly and TRU 120 EX is doing a good job for cooling the CPU.
Reinvented,can you please give me voltages you're Priming at ,at the moment?Thanks again
Reply With Quote
Bookmarks