Quote Originally Posted by Ace-a-Rue View Post
a couple things that i would recommend:

3rd, try boosting your ICHIO 1.5v to 2.0v for a short time along with boosting your MCH to 1.7v for a short time to see if that steadies your overclock or allows you to go higher...if it does allow for a higher overclock or makes it very stable then you can back it down a notch at a time to find the sweet spot.
We just may have gotten somewhere now. I tried your settings and got an instant shutdown when enabling them in uGuru. So I backed the MCH to 1.65 and the ICHIO to 1.81 with vCore at 1.425 which gives me 1.36 at load ( I really need to do the volt mod ). These settings got me 7 minutes of Small FFT's before Core 2 crapped out. So I upped the vCore to 1.4925 and got an instant shutdown upon firing up Prime. This thing just hates high voltages. So I just went to bed ans tossed and turned thinking about it. This morning I got up and went back to the first settings of MCH 1.65, ICHIO of 1.81, and vCore of 1.425. But this time I set the CPURef's to 70% instead of 67%. I am now almost 2.5 hours into Small FFT's without a whimper from it this time. I am beggining to like this thing now Thank's Ace for the suggestions.