Quote Originally Posted by Ace-a-Rue View Post
here is the latest Uguru (3.104): ftp://ftp.abit.com.tw/pub/download/u...s/uguru/3.104/

if you are using 3.104 then i would clear CMOS with the battery out for a few minutes...also push your power button and reset button to unload the capacitors while clearing CMOS.

BTW, what bios are you using on your board?...did you flash it with the "wb" (write boot block)...that area stows the voltages and NB memory strap settings...it is not normally flashed

if you are using the 11 official bios and clearing cmos does not take care of your issues, i would think about RMA'ing the board...but, try re-flashing and use the "wb" switch...follow my link in my signature to get the instructions on how to flash.
Uguru was 3.103, d.l 3.104 as I type. I did flash to the 11 official as per your instructions when I first got the board. I will try again when I take the board down to try a new hs that I want experiment with, but it needs a lap-job before I switch form the Ultra120. I am waiting for 2 new fans before I do the switch. I may do the bios again before then just to test. Thanks for the ideas.