Well my board is working like a champ cant grumble with this on air
Code:>CPU Feature: Thermal Management Control......... - Disabled PPM(EIST) Mode..................... - Disabled Limit CPUID MaxVal................. - Disabled CIE Function....................... - Disabled Execute Disable Bit................ - Enabled Virtualization Technology.......... - Enabled Core Multi-Processing.............. - Enabled >DRAM Timing: Enhance Data transmitting.......... - Fast Enhance Addressing................. - Fast Channel 1 CLK fine delay........... - 14 Channel 2 CLK fine delay........... - 14 CAS Latency Time (tCL)............. - 5 RAS# to CAS# Delay (tRCD).......... - 5 RAS# Precharge (tRP)............... - 5 Precharge Delay (tRAS)............. - 9 All Precharge to Act............... - 5 REF to ACT Delay (tRFC)............ - 48 Performance Level.................. - 7 Read delay phase adjust............ - Auto MCH ODT Latency.................... - Auto Write to PRE Delay (tWR)........... - 14 Rank Write to Read (tWTR).......... - 11 ACT to ACT Delay (tRRD)............ - 3 Read to Write Delay (tRDWR)........ - 9 Ranks Write to Write (tWRWR)....... - Auto Ranks Read to Read (tRDRD)......... - Auto Ranks Write to Read (tWRRD)........ - Auto Read CAS# Precharge (tRTP)......... - 5 ALL PRE to Refresh................. - 3 Genie BIOS Settings: Exist Setup Shutdown............... - Mode 2 CLOCK VC0 divider.................. - Auto CPU Clock Ratio Unlock............. - Enabled CPU Clock Ratio.................... - 8 Target CPU Clock................... - 3800MHz CPU Clock.......................... - 475 Boot Up Clock...................... - Auto DRAM Speed......................... - 266/667 Target DRAM Speed.................. - 1191MHz PCIE Clock......................... - 100mhz >Voltage Settings: CPU VID Control.................... - 1.52500v CPU VID Special Add................ - Auto DRAM Voltage Control............... - 2.270v SB 1.05V Voltage................... - 1.070v SB Core/CPU PLL Voltage............ - 1.55v NB Core Voltage.................... - 1.50v CPU VTT Voltage.................... - 1.60v Vcore Droop Control................ - Disabled Clockgen Voltage Control........... - 3.45v GTL+ Buffers Strength.............. - Weak Host Slew Rate..................... - Weak GTL REF Voltage Control............ - Disable CPU GTL1/3 REF Volt................ - 110 CPU GTL 0/2 REF Volt............... - 110 North Bridge GTL REF Volt.......... - 110 Genie BIOS Settings: PCIE Slot Config................... - 1X 1X CPU Spread Spectrum................ - Disabled PCIE Spread Spectrum............... - Disabled SATA Spread Spectrum............... - Disabled
Reply With Quote
Bookmarks