Quote Originally Posted by nachthymnen View Post
Hi, the mobo has arrived yesterday.
The cpu 1 month ago, RAM and VGA has 1 year of life.
After a "non start" with the ram in the yellow slots, I have put the ram in the green slots and the the mobo is started.
I have install Windows+sp2 ecc and after 1 hour the pc has freeze.
I have try everithing, single channel ram, change the vga in the secon pci slot, clear c-mos but the mobo didn't start.
This morning the mobo has started again after remove the battery but after 1 hour same problem as yesterday
Now he don't boot
I don't know how I can do
In 2 days only 2 hours running
I am in the green slots as well.

I would say your windows freezeing is just a stability/settings problem are you overclocked ?

Are you using EZ Clear properly i.e with power to the board as it wont work without power ?


Remember you have to have power to the board to use EZ Clear it will not clear CMOS with the PSU switched off. Hold reset down, then hold power down too wait 4+ seconds release power then reset then hit power to boot. It will then boot & power off then boot & allow you back in CMOS.

Also something Eva showed me, If you just want to reset the fsb as you over cooked it power down hold down home & power back on, the rig will boot then power off you then let the home key go & it will re-boot & allow you to hit del to get back in the BIOS.
CN