**Official DFI LanParty UT P35-T2R Review/Overclock/Guide Thread**

[robbynaish]

nobody as tested the two cooling configs ?

[Brother Esau]

Well I got my DFI P35 today and it follows suit with the rest of this unreliable Intel TRASH C1 Error various other problems then continuous reboot and no post. Thats absolutely it....... I have had enough of this crap!!!! This will be 7 Motherboards in only 4 months that have went belly up all with the Intel Logo and trademark of unreliability and low standard of quality with high price tag to be their friggin Beta Tester and pay through the Nose to boot!
I will be selling all of my Intel TRASH and never buying another product from them EVER!!!!!

[Raja@ASUS]

Well I got my DFI P35 today and it follows suit with the rest of this unreliable Intel TRASH C1 Error various other problems then continuous reboot and no post. Thats absolutely it....... I have had enough of this crap!!!! This will be 7 Motherboards in only 4 months that have went belly up all with the Intel Logo and trademark of unreliability and low standard of quality with high price tag to be their friggin Beta Tester and pay through the Nose to boot!
I will be selling all of my Intel TRASH and never buying another product from them EVER!!!!!

Sorry to hear that man...

I thought you had the board back a few pages ago, did not know it had just landed...

Can't think of what it could be for sure as the component list in your sig looks fine, assuming all works ok, which is a question that I already know the answer to.

regards
Raja

[C-N]

Well I got my DFI P35 today and it follows suit with the rest of this unreliable Intel TRASH C1 Error various other problems then continuous reboot and no post. Thats absolutely it....... I have had enough of this crap!!!! This will be 7 Motherboards in only 4 months that have went belly up all with the Intel Logo and trademark of unreliability and low standard of quality with high price tag to be their friggin Beta Tester and pay through the Nose to boot!
I will be selling all of my Intel TRASH and never buying another product from them EVER!!!!!

Thats not good

I had a few C1 errors when I first got my board & I just figured I was being too heavy handed with it as I haven't had one since.

Compared to the last few boards I have had the DFI BIOS cycles slowly so make sure you give it time to boot/double boot.

For me 1:1 gives me C1 errors at random now & again when I rapidly adjust settings/fsb yet all the other dividers work flawlessly & will let me make any changes & still boot.

Remember you have to have power to the board to use EZ Clear it will not clear CMOS with the PSU switched off. Hold reset down, then hold power down too wait 4+ seconds release power then reset then hit power to boot. It will then boot & power off then boot & allow you back in CMOS.

Also something Eva showed me, If you just want to reset the fsb as you over cooked it power down hold down home & power back on, the rig will boot then power off you then let the home key go & it will re-boot & allow you to hit del to get back in the BIOS.

Hope this helps this board is great but you have to respect it.

CN