Cell-SHOCKS ag. DDR3-2000 7-6-5-18 1T Prime_Pi Stable

[Fr3ak]

I still have trouble to get 32m stable at above 900MHz, but I blame the board for that. It seems like the NB is stressed a lot with the memory running that high. I can run 32m stable with memory at 750MHz and a FSB of 525MHz with 1.4VMCH. To boot at 450MHz with RAM running DDR3 1800 I already need about 1.6V on the MCH to even boot into windows.

I didn't have much time so far, so I tried a couple of different settings with 1M to get a slight idea what is possible and what is not.
I will do more testing with 32m over the weekend, here is what I have so far:

Edit: All tests were done with 2,24 V Vdimm. I know I am a jerk Will try with less voltage tonight. I have a strong feeling it is the board limiting me and not the RAM, so the settings below will most likely run with less Vdimm too.