**Official DFI LanParty UT P35-T2R Review/Overclock/Guide Thread**

[jjk454ss]

Anyone have problems with 4 x 1GB of RAM? I am having problems with 4 sticks of G.Skill 800. I can run either set I have by itself, but if I try both it starts loading Windows and restarts.

[eva2000]

Anyone have problems with 4 x 1GB of RAM? I am having problems with 4 sticks of G.Skill 800. I can run either set I have by itself, but if I try both it starts loading Windows and restarts.

memtest86+ v1.70 is your friend and play with clk fine delay values as well.. but i have yet to test 4x1GB myself so not sure.

2:3 divider with 2x1GB Crucial Ballistix Tracer PC2-8500 Micron D9GMH modules. DFI LP UT P35-T2R has very tight default performance level on 2:3 divider at Performance Level = 4! So be sure to have nice Micron D9xxx modules if you run Performance level = AUTO in bios

• 500mhz 4-4-4-9 AUTO sub timings with AUTO Enhanced Data Transmit/Enhance Addressing at 2.15v bios
• 535mhz 4-4-4-9 AUTO sub timings with AUTO Enhanced Data Transmit/Enhance Addressing at 2.27v bios
• 558mhz 4-4-4-9 AUTO sub timings with AUTO Enhanced Data Transmit/Enhance Addressing at 2.38v bios
• 564mhz 4-4-4-9 AUTO sub timings with AUTO Enhanced Data Transmit/Enhance Addressing at 2.42v bios

@500Mhz 4-4-4-9 at 2.15v









@558Mhz 4-4-4-9 at 2.38v



Single 32M



Dual 32M half way



Dual 32M complete



Everest Ultimate 4.10.1076 beta vs 4.10.1108 beta






@564Mhz 4-4-4-9 at 2.42v



Single 32M



Dual 32M half way



Dual 32M complete



Everest Ultimate

[jjk454ss]

memtest86+ v1.70 is your friend and play with clk fine delay values as well.. but i have yet to test 4x1GB myself so not sure.

2:3 divider with 2x1GB Crucial Ballistix Tracer PC2-8500 Micron D9GMH modules. DFI LP UT P35-T2R has very tight default performance level on 2:3 divider at Performance Level = 4! So be sure to have nice Micron D9xxx modules if you run Performance level = AUTO in bios

• 500mhz 4-4-4-9 AUTO sub timings with AUTO Enhanced Data Transmit/Enhance Addressing at 2.15v bios
• 535mhz 4-4-4-9 AUTO sub timings with AUTO Enhanced Data Transmit/Enhance Addressing at 2.27v bios
• 558mhz 4-4-4-9 AUTO sub timings with AUTO Enhanced Data Transmit/Enhance Addressing at 2.38v bios
• 564mhz 4-4-4-9 AUTO sub timings with AUTO Enhanced Data Transmit/Enhance Addressing at 2.42v bios

Thanks for the reply. You are not talking to an expert here though . I did take this memory from my old machine, and I did run memtest not to long ago because I was thinking of selling it. I don't think it is a problem with the memory. As far as clk fine delay values, I will try and find some info so I can learn what to change there. Thanks

Another question. I am trying to update the BIOS, I have no floppy so I tried the WinFlash program. When I try and run winflash.exe I get this message: OnBoard BIOS Not Award BIOS!, i clikc OK and it just closes. Am I doing something wrong?

[Praz]

As far as clk fine delay values, I will try and find some info so I can learn what to change there

DFI has done a good job with clk fine delay auto settings. To fine tune you won't need to adjust more then a couple of notches in either direction. So for I have found for most configurations the auto values are pretty much dead on.

[s0lid]

Man i want this mobo!
Omg FSBs

[EternityZX9]

Thanks for the reply. You are not talking to an expert here though . I did take this memory from my old machine, and I did run memtest not to long ago because I was thinking of selling it. I don't think it is a problem with the memory. As far as clk fine delay values, I will try and find some info so I can learn what to change there. Thanks

Another question. I am trying to update the BIOS, I have no floppy so I tried the WinFlash program. When I try and run winflash.exe I get this message: OnBoard BIOS Not Award BIOS!, i clikc OK and it just closes. Am I doing something wrong?

I would recomment getting a floppy to update the BIOS...

[Strafe]

I am trying to update the BIOS, I have no floppy so I tried the WinFlash program. When I try and run winflash.exe I get this message: OnBoard BIOS Not Award BIOS!, i clikc OK and it just closes. Am I doing something wrong?

Winflash doesnt work in Vista64. Use the USB flash drive method explained by RLM above (thanks for that by the way RLM!)

[Strafe]

Anyone have problems with 4 x 1GB of RAM? I am having problems with 4 sticks of G.Skill 800. I can run either set I have by itself, but if I try both it starts loading Windows and restarts.

If you are using Vista64, there is a hotfix that needs to be applied before you can use more than 3GB, otherwise it will BSOD on startup. I do beleive you also have to update the BIOS as well because I have applied the patch and now the BSOD I get says the bios is not acpi compliant.

http://support.microsoft.com/kb/929777

[jjk454ss]

If you are using Vista64, there is a hotfix that needs to be applied before you can use more than 3GB, otherwise it will BSOD on startup. I do beleive you also have to update the BIOS as well because I have applied the patch and now the BSOD I get says the bios is not acpi compliant.

http://support.microsoft.com/kb/929777

Strafe, are you using this board? Does anyone know if I do have to install this hotfix? I don't remember doing this with my ASUS P5B Deluxe.

[EternityZX9]

Anyone have problems with 4 x 1GB of RAM? I am having problems with 4 sticks of G.Skill 800. I can run either set I have by itself, but if I try both it starts loading Windows and restarts.

Update the BIOS. I had the same problem. That fixed it.