ASUS P5W DH - Problems + Fixes Thread

[lhmk]

what brand of memory runs well in 4 X 1GB for vista 64 on this board?
I have 4 X 1 GB Corsair value ram and can never get Vista 64bit to install, keeps getting BSOD even with memory remap off (onboard still 4GB with 3GB useable). Takes off 1 stick and installation can start. my P5W-DH bios is 2301 and running E6850 cpu.
Try reshuffling the ram to go to different slot also not successful. The 4GB rams was working well previously in my Windows XP 32 bit although i can only detect 3GB in windows xp 32bit.
Any advise?

G.Skill 4x 1GB F2-6400PHU2-2GBHZ runs fine for vista 64bit, i have memory remap enabled, 2,15 Volt.
Win Xp shows only 3 GB, thats normal.
I'm running E6850CPU with bios 2301, too.

[crazeconnolly]

Which procedure would i take to revert back to my original BIOS version.
As newer versions i have downloaded have failed to disable onboard sound.

c

[w2richwood]

Which procedure would i take to revert back to my original BIOS version.
As newer versions i have downloaded have failed to disable onboard sound.

c

older verion of afudos 2.11 or something there abouts and its work great
Rich

[yoggi]

Do you recommend the Memory Remap feature to be off or on (As stated in the bios) when running Vista 64 w 4Gb Memory.

does it even make any difference with that setup?

[Break16]

hello

why my system crash after the bootlogo from xp?

i have 4GB of this rams

2x -> Corsair XMS2 DIMM Kit 2048MB PC2-6400U CL4-4-4-12 (DDR2-800) (TWIN2X2048-6400C4)

the voltage is on 2.1 and the timings 4-4-4-12. thats from corsair and i have this also in bios.

i get always a bluescreen. the system is not stable

PLEASE HELP ME PLEASE HELP ME PLEASE HELP ME

[diexmax]

My overclock in e6300

pictures in .zip

i am brazilian, my inglesh is bad

blue screen only vcore low...


http://www.filefactory.com/file/f7da27/

[diexmax]

look

http://img529.imageshack.us/my.php?i...uperpi3lu7.jpg

in configs post above

[chron]

Ok everyone, I've been getting lockups lately and so far my best guess is that it's because of my bios version. I'm using 2403.

I bought 2x2gb sticks of ddr2-1000 from g.skill and the system didnt read all of it. I was ignorant and thought it was a bios issue so I flashed from 1901 to 2403. I could never get the sticks stable to I put my old 2gb in and I'm sending the 4gb back.

Prior to flashing to 2403, my system would run orthos stable for over 12 hours and now, orthos shuts the computer down after about an hour. This morning I woke up, turned my monitors on, opened up team speak, connected, started to broadcast to my friends, and the system froze. It's frozen a few times now.

I also recently purchased an 8800GT, which might be a cause, but I dont see how since it passes visual stress tests for over 12 hours.


Is 2403 unstable at all? Is 2004 ok for EVERYONE? I just built a system for my little brother using the same motherboard, but his still has the 1901 bios chip in it. Would it be ok to put my 2403 into his system when his is not overclocked at all?

[JimmyDDD]

I have the Q9300, I was only able to get 2.62 GHZ per core. What is the maximum you guys were able to get and what configuration did you use? Thanks