E6850 LN2 Actions @Team Japan

[Stapler]

Impressive score Hideo-san! Congrats

What is the Vio voltage? (Sorry for the stupid question ... )


Marco

3.3v line on PSU

I'm also interested in the CPU PLL voltage mod.

[funkflix]

Awesome resullts! Congratulation guys!

Have you got any picture for the CPU PLL Voltage vmod?

I'm very interested in that, too! Thanks in advance.

[fredyama]

Thanks a lot all

@Zannema, Stapler & funkflix

Please see Hideo's CPU PLL Voltage vmod here.

Cheers

[funkflix]

Thanks a lot all

@Zannema, Stapler & funkflix

Please see Hideo's CPU PLL Voltage vmod here.

Cheers

Thanks mate!

[dinos22]

too bad DDR3 absolutely destroys DDR2 in 32M now

Try telling that to NewBeetle-san

i am scared to think how good his time would be if he had Micron DDR3 stuff

with only 850MHz 7-6-5-15 he would easily beat that time >>> also high FSB for the first time i know affects SuperPi from my recent testing with Asus P5KC hybrid DDR2/3 board so a CPU capable of astronomical FSB tweaked well would be amazing too [EDIT] errr 600MHz FSB on that run....well well well i think i know why that was quick >>> it may not be just P35+DDR3 then hehehe

now with Micron RAM 850 at those timings is nothing.....people will bench past 900 easily it will be amazing what it will do for superpi

[Stapler]

850 6-5-5-15 is very doable, check this SS (not mine, don't pay attention to the SP2004 clock it's not reporting right):

[dinos22]

nice sticks OPB has for sure

well basically what i'm saying is that DDR3 is taking off where DDR2 left off IN 32M

in 1M times are still slow so 6-5-5- might actually be more beneficial there because of tight timings

[fredyama]

@dinos22 & Stapler

We appreciate your suggestion but this thread is not for if and what results.
Perhaps, you guys want to continue posting your views in more appropriate thread where the actual DDR3 32M PI results reside.

Thank you.

[Misko]

out of breath

[Zannema]

Thanks a lot all

@Zannema, Stapler & funkflix

Please see Hideo's CPU PLL Voltage vmod here.

Cheers

Thank fredyama-san

[dinos22]

@dinos22 & Stapler

We appreciate your suggestion but this thread is not for if and what results.
Perhaps, you guys want to continue posting your views in more appropriate thread where the actual DDR3 32M PI results reside.

Thank you.

yes you are right

[over@locker886]

Congrats Hideo-san, very good work!!

[asterix34]

Very nice Mhz great fsb ! Congratulations 'team japan' san.

[Felipe]

Congratulations team japan

[Stapler]

@dinos22 & Stapler

We appreciate your suggestion but this thread is not for if and what results.
Perhaps, you guys want to continue posting your views in more appropriate thread where the actual DDR3 32M PI results reside.

Thank you.

Sorry, for the off topic, didn't meant to clutter Hideo's thread.

Thank you for sharing the CPU PLL mod, unfortunately my P5K came DOA.

[eva2000]

By TAM

Just quick LN2 benching results before he went to pray his ancestors-- Bon- Festival

Time: 9.187s (Super PI / mod1.5XS)
Clock: 5568.0MHz (fsb618.7MHz x9)
CPU: Intel Core2 Duo E6850 (SLA9U / L723A347 / 2L72141 4A22**)
M/B: ASUS P5B DELUXE REV.1.10G (72M0AI8930** / PCB MADE IN CHINA / bios1004)
CPU Cooling: LN2 (kuri-Pro4 + V-TEC ARC Bed Rev.4.0 memesamaSP)
Memory: Team Xtreem PC-9600(DDR2-1200) 1GBx2
VGA: ATI rageXL (PCI)
HDD: IBM DTLA-307020
Power Supply: Zippy-460w
Vcore: 1.94v, Vdimm: 2.65v, Vio: 3.45V
OS: Windows Server 2003
MEM: 1:1, 4-4-4-4-4-25-5-10-5-10-faster (bios)

http://u-san.net/c-board/file/E6850-5568_09s187.gif

http://u-san.net/c-board/file/CPU-Z_E6850-5567.gif

congrats

Just got my first E6850 and same batch as yours

E6850 SLA9U
FPO/Batch: L723A347
Version: D97262-001
Pack Date: 07/27/07

[Zannema]

@ fredyama: Have you got a CPU PLL Voltage vmod for p5k-e?

[fredyama]

@ fredyama: Have you got a CPU PLL Voltage vmod for p5k-e?

I believe this is the one Hideo uploaded for P5K-E.
Please make sure it with your M/B though

[BeardyMan]

Nice cpu fredyama , i believe have the same
4.1ghz on air 1.55V

[Zannema]

I believe this is the one Hideo uploaded for P5K-E.
Please make sure it with your M/B though

Thank you fredyama-san

[BeardyMan]

@ fredyama
MEM: 1:1, 4(5)-4-4-4-4-4-25-4-9(10)10-10-4-8-4-4-2 (Memset)


I believe this is T2?
Could you try with bios 0603, how far you can go on T1?
perhaps not that far, but i think you can still go far

greetz!

[fredyama]

Thanks again all for your compliments

@dinos22 & Stapler

Thank you for your kind understanding

congrats
Just got my first E6850 and same batch as yours
E6850 SLA9U
FPO/Batch: L723A347
Version: D97262-001
Pack Date: 07/27/07

Thank you so much eva2000-san
As NewBeetle pointed out, how high FSB we can get out from it at 1.35Vcore x6 seems to be a key factor under extreme cooling
As you know, not all L723A347 is as good as TAM's so you should grab them all while they are available

Thank you fredyama-san

You are most welcome, Zannema-san
Wish you best of luck with your awesome E6700

Here are some more results-- though mediocre one after seeing that of TAM & Hideo

By picoo

Super PI Mod 1M: 9.281s @5469.5MHz （FSB 607.7×9.0）


(Setup)
CPU:Memory＝1:1
Ratio CMOS Setting : x9
FSB Frequency : 560MHz@boot
PCIE Frequency : 100
DRAM Frequency : DDR2-1160MHz
DRAM Command Rate : Auto
DRAM Timing Control ～ : M（4-4-4-4～A）-D、E-1-1000mV、D-D

CPU Voltage : 1.800V（Actual）
CPU Voltage Danper : Enabled
CPU PLL Voltage : 1.80V
DRAM Voltage : 2.600V（Actual)
FSB Termination Voltage : 1.50V（BIOS）
North Bridge Voltage : 1.80V（Actual）

CPU：Core 2 Duo E6850（L723A317）
M/B： ASUS P5K Deluxe/WiFi-AP（BIOS:0501）Vcore・Vdimm・Vnb mod、N-Chipset under watercooling

CPU cooling: LN2
Chipset cooling: Water temp 12℃（assisted by airconditionner）
Northbridge cooling: Alphacool SNB-N Silver Northbridge
PUMP / Alphacool AP900 12V + Voltage Module12-24V AP step-up adaptor
RADIATOR / Alphacool NexXxoS XtremeⅢ/120ｘ38ｍｍ(2000rpm)ｘ3
RESERVOIR / Mitron Interlink WT-TB-B, TUBE / innovatek(500898) 10/8mm
Southbridge cooling: On air with heat sink from P5B-Deluxe

Memory： Team Xtreem PC2-9600(DDR2-1200) CL5 1GBx2 with Heatsink:Thermalright HR-07 X2
VGA: Matrox MillenniumG450/D32PDV（PCI）
HDD: HDS728080PLA380 80GB
POW1: OCZ Power Stream Power Supply 520W（for Water cooling）
POW2: Zippy-720PE（for system）
OS: Server2003 Enterprise Edition
BED: V-TEC ARC Bed Rev.5.0 Professional by Vigor
Copper pot: kuri-Pro4 by TAM
System Rack: B-ONE x2
Thermal grease: ArcticSilver5


By fredyama

modPI 1.5 XS 1M: 9.265s @5462.7MHz (FSB607.0MHz x 9)


(Setup)
M/B: ASUS P5K#2 75M0AC298*** (Bios 0414, Vcore mod, Vdimm/Vcpu pll clip mod & Vdroop Pencil mod)
M/B Bed: V-TEC ARC Bed Rev.3.32 by Vigor
CPU: Core 2 Duo E6850 L723A943/2L72356/7A1***
CPU Cooling: LN2　KuriPro4 by TAM
Chipset Cooling: Normal
Memory: Team Xtreem PC2-9600#2 1GB x 2
VGA: ATI 3D Rage PCI 8MB
HDD: IBM DTLA-307030 PATA 30.7GB
Power Supply: OCZ PowerStream 520W
Vcore: 1.906～8V(Actual), Vdimm: 2.677V(Actual), Vnb: 1.730(Actual), Vcpu pll: 2.405V(Actual), Vio: 3.488V(Bios), Others: Max Bios value
OS: Windows Server 2003
MEM: 1:1, Bios setting: 4-4-4-4-4-4-25-4-4-4-E-A-A
Others: FSB555@boot, SetFsb2.0.b.15f, MemSet3.3, ERAM2.11, AutoGear, MAXMEM=600, Ceramique by Arctic Silver

Cheers　

[Gautam]

Very nice speed and time by picoo.

And very very well done SuperPi time by yourself, Fred-san. It's a pleasure to finally see you back into action. It seems your E6850 hunt has already been quite profitable.

[qballe]

nice 6850s

[Pete]

Flipping heck. Just got a E6850 thats doing 4.1 @ 1.5 on water. I think user had problems with mobo. Im awaiting a new mobo to see what i can get it to do on water!