are you using phase?
are you using phase?
BIOSTAR TPOWER I45 UNOFFICIAL THREAD
BIOSTAR TPOWER BOLT MOD FOR HEATPIPE AND HEATSINK
BIOSTAR TPOWER I45 BIOS FLASHING PROCEDURE
ABIT IP35 PRO HEATPIPE MOD
ABIT IP35 PRO BIOS FLASHING PROCEDURE
IP35 Pro: 9650@4000Mhz, par overclocker; Freezone Elite; 4Gb GSkill DDR-800@DDR-1068 (2 x 2gb); XFX 8800 GTS; Areca 8X PCIe in Raid 0 working at 4x speed; 4-250 Gb (single platter) 7200.10 drives; Giga 3DAurora case with side window.
To Everyone:
I just bought the 18th Anniversary Asus P5K-Premium "Black Pearl" and I'll be starting a new thread similar like this. The OC testing methodology will be very much the same as this one. 90% of the OC results are going to be based on Prime 25.3 and the rest 10% will be Max FSB and Suicide Max Screen, etc.
I'll be testing the new mobo with the existing golden Q6600 G0 and Ballistix Tracers 8500. My goal will be seeking for better OC-ability in 4x1GB configuration, hopefully. This is probably the only area I've to point out that P5K-Deluxe didn't impress me much but it didn't disappoint me either. I'll be expecting the Black Pearl to deliver lower temp and greater OC-stability at higher OC'ed state.
You guys should see the new thread by the end of tomorrow.
Looking forward to see you all participating in the upcomming new thread.
Sorry for the poor quality pics
![]()
Last edited by XtremeTiramisu; 08-02-2007 at 10:06 PM.
Xtreme Air-Cooled OC System:
Mobo: Asus Rampage Formula (X38 Edition) Rev 1.03G (BIOS: 0803)
CPU: C2Q Q6600 "G0" L723A765, VID 1.2625, 3720mhz, FSB 465*8, Vcore: 1.464, Idle/load temp: 31c/64c
CPU Heatsink: Thermalright Ultra120 Xtreme lapped (2* Scythe S-Flex SFF21F S-FDB 120mm Push-Pull configuration)
RAM: Kingston HyperX T1 2x2GB PC2-8500 (DDR2-1116)(5-5-5-15-3-52-6-3-8-3-5-4-6-4-6-14-5-1-5-5)(2.264 Vdimm)(Rated @ 2.3v default clock)
HDD: Western Digital Caviar Black 640GB WD6401AALS-00L3B (AHCI)
Video Card: XFX 8800GTS 320mb Xtreme, Core 612 Shader 1420 Mem 900 (Stock cooling)
Sound Card: Auzentech Meridian 7.1 (8788 chipset)
DVD: Pioneer 212D SATA DVD-RW
PSU: Corsair HX620W Modular
Xtreme Air Cooled Case: Antec 900 case | 3*120mm intake | 1*120mm & 1*200mm exhuast
OS: Vista Ultimate x64 SP1 Build 6001
Looking forward to your new thread XtremeTiramisu![]()
lots and lots of cores and lots and lots of tuners,HTPC's boards,cases,HDD's,vga's,DDR1&2&3 etc etc all powered by Corsair PSU's
CPU:Q6600 G0@3.6 Batch L723A795; 1.352 vcore
COOLER:Thermalright Ultra120 Xtreme Scythe S-Flex S-FDB 120mm 1600rpm
MOBO: Asus P5E , bios 0702
RAM: Corsair CM2X2024-6400C4
CASE: Lian Li G70B mod
PSU: Silverstone Olimpia OP 750
GPU: XFX GeForce 8800 GTS 320MB
OS: Windows XP SP3 ; Windows Vista Ultimate x64 SP1
Or I will buy it... or if you have a solution to the ASUS's butthole motherboard, P5N32-E SLI, i'll pay you for that too ... this crap is anonying me. 3.25GHZ, can't get any higher.
I finally had a chance to do some thorough benchmarking with the Data Execution Prevention ( DEP ) feature in Windows XP enabled and disabled. My test was to run 3DMark05 3 times with it enabled and then to run it again 3 times with it disabled. I rebooted after each individual run of 3DMark so the results would be as consistent as possible.
Here are my 3DMark05 results with DEP turned ON.
Here are my 3DMark05 results with DEP turned OFF.
GameTest 1 - Return to Proxycon
ON - 59.47 fps
OFF - 59.53 fps
GameTest 2 - Firefly Forest
ON - 35.70 fps
OFF - 35.73 fps
GameTest 3 - Canyon Flight
ON - 67.80 fps
OFF - 67.93 fps
The overall average of these 3 games is a difference of less than one tenth of one frame per second. You better have a pretty good eye to notice that.
I think the benefit of Data Execution Prevention by enabling the NX bit is well worth the tiny performance hit. Disable DEP if you're benching for a new world record but I'm turning DEP back on.
You can run NXTest.exe to see the status of DEP on your system.
http://user.cs.tu-berlin.de/~normanb/
![]()
i agree with you, unclewebb!
BIOSTAR TPOWER I45 UNOFFICIAL THREAD
BIOSTAR TPOWER BOLT MOD FOR HEATPIPE AND HEATSINK
BIOSTAR TPOWER I45 BIOS FLASHING PROCEDURE
ABIT IP35 PRO HEATPIPE MOD
ABIT IP35 PRO BIOS FLASHING PROCEDURE
IP35 Pro: 9650@4000Mhz, par overclocker; Freezone Elite; 4Gb GSkill DDR-800@DDR-1068 (2 x 2gb); XFX 8800 GTS; Areca 8X PCIe in Raid 0 working at 4x speed; 4-250 Gb (single platter) 7200.10 drives; Giga 3DAurora case with side window.
I concurI think the benefit of Data Execution Prevention by enabling the NX bit is well worth the tiny performance hit. Disable DEP if you're benching for a new world record but I'm turning DEP back on.![]()
Now how the hell do I switch DEP back on?
Execute Disable bit 'Enabled'
Bootini changed back to 'optin'
run nxtest, and it still tells me DEP is not activated.![]()
RLM
QX9650@4.5ghz Vapochill LS
E8600 (Boxed)
Rampage Extreme
OCZ Gold DDR3 (8500) 1680 7-6-6-20-2T
4870x2 Vmodded + Ek Nickel
9800GX2 Vmod + EK H20 (Stored)
Thermaltake TP 1000W
Lian Li P007 Case
Oh well, I tried..., who I'm I to tell you![]()
Last edited by Clint; 08-03-2007 at 10:09 PM.
GA-H55N-USB3
i3-550 L008B555 @4.6GHz (1.36v)
Sapphire HD 5850 @1GHz/1.3GHz (1.25v)
GSkill ECO 4GB PC3-12800 @1.33GHz 6-6-6-20 1T (1.34v)
Super Pi would have been a better bench to use to compare on/off![]()
lots and lots of cores and lots and lots of tuners,HTPC's boards,cases,HDD's,vga's,DDR1&2&3 etc etc all powered by Corsair PSU's
Seems to get a positive out of nxtest you need to use 'AlwaysOn' instead of 'OptIn'. However this causes all sorts of conflicts in XP.Now how the hell do I switch DEP back on?
Execute Disable bit 'Enabled'
Bootini changed back to 'optin'
run nxtest, and it still tells me DEP is not activated.
Back to sort of on.
RLM
QX9650@4.5ghz Vapochill LS
E8600 (Boxed)
Rampage Extreme
OCZ Gold DDR3 (8500) 1680 7-6-6-20-2T
4870x2 Vmodded + Ek Nickel
9800GX2 Vmod + EK H20 (Stored)
Thermaltake TP 1000W
Lian Li P007 Case
That's nice.All sorts of conflicts? I've had all my XP systems
running DEP ON, NO EXCEPTIONS for years and have
encountered nothing that seemed to fail with that.
QX9650@4.5ghz Vapochill LS
E8600 (Boxed)
Rampage Extreme
OCZ Gold DDR3 (8500) 1680 7-6-6-20-2T
4870x2 Vmodded + Ek Nickel
9800GX2 Vmod + EK H20 (Stored)
Thermaltake TP 1000W
Lian Li P007 Case
Rig under construction:
Core 2 Quad Q6600 G0 - L733B470 1.25 VID
DFI LanParty LT P35-T2R
Thermalright Ultima 90 w/Zalman ZM-F3 1800rpm
G.SKILL 4GB(2 x 2GB) DDR2 1000 (PC2 8000)
XFX GeForce 7900GS 256MB (will upgd in Q2)
Seagate Barracuda 7200.10 250GB
Seagate Barracuda 7200.11 500GB
LG Electronics 18X SATA DVD
XCLIO GREATPOWER 550W
Antec P182B case
I haven't played a few rounds of SuperPI for a while. I chose a gaming benchmark with pretty good repeatability for my test. Some benchmarks vary too much from one run to the next even with everything exactly the same to give any sort of meaningful results.
This switch seems to turn it on for all programs except the programs you choose not to have it on for:
/NoExecute=OptOut
http://support.microsoft.com/kb/875352
Last edited by unclewebb; 08-04-2007 at 09:31 AM.
Look mate, like a lot of others here I was more than willing to try out what you had to say. An open mind.Yes, but don't bother...it's clearly a matter of "ePenis" syndrome..
Consider my input in subject ended.
I'll be the first to admit, relatively speaking that I'm an ignoramus.
That said, if we are missing something, then cut out the mysticism and back it up with some results.
RLM
QX9650@4.5ghz Vapochill LS
E8600 (Boxed)
Rampage Extreme
OCZ Gold DDR3 (8500) 1680 7-6-6-20-2T
4870x2 Vmodded + Ek Nickel
9800GX2 Vmod + EK H20 (Stored)
Thermaltake TP 1000W
Lian Li P007 Case
i find these gains, that folks recommend, somewhat illusive when others try them...they are very hard to quantify when you do not have the exact same hardware and settings as the individual who recommends them.
BIOSTAR TPOWER I45 UNOFFICIAL THREAD
BIOSTAR TPOWER BOLT MOD FOR HEATPIPE AND HEATSINK
BIOSTAR TPOWER I45 BIOS FLASHING PROCEDURE
ABIT IP35 PRO HEATPIPE MOD
ABIT IP35 PRO BIOS FLASHING PROCEDURE
IP35 Pro: 9650@4000Mhz, par overclocker; Freezone Elite; 4Gb GSkill DDR-800@DDR-1068 (2 x 2gb); XFX 8800 GTS; Areca 8X PCIe in Raid 0 working at 4x speed; 4-250 Gb (single platter) 7200.10 drives; Giga 3DAurora case with side window.
hey Tiramisu!
have u tried reading (or could u) the W's ur PSU it maxing when all of this is @ full load?
TIA
PS: gj so far btw![]()
@RLM I find the following about DEP. May be it helps...
BIOSTAR TPOWER I45 UNOFFICIAL THREAD
BIOSTAR TPOWER BOLT MOD FOR HEATPIPE AND HEATSINK
BIOSTAR TPOWER I45 BIOS FLASHING PROCEDURE
ABIT IP35 PRO HEATPIPE MOD
ABIT IP35 PRO BIOS FLASHING PROCEDURE
IP35 Pro: 9650@4000Mhz, par overclocker; Freezone Elite; 4Gb GSkill DDR-800@DDR-1068 (2 x 2gb); XFX 8800 GTS; Areca 8X PCIe in Raid 0 working at 4x speed; 4-250 Gb (single platter) 7200.10 drives; Giga 3DAurora case with side window.
Chessman, I did scan through this page previously. I remember the section on driver compatibility.@RLM I find the following about DEP. May be it helps...
Bookmarked now though, will take the time to read it through properly. Cheers![]()
RLM
QX9650@4.5ghz Vapochill LS
E8600 (Boxed)
Rampage Extreme
OCZ Gold DDR3 (8500) 1680 7-6-6-20-2T
4870x2 Vmodded + Ek Nickel
9800GX2 Vmod + EK H20 (Stored)
Thermaltake TP 1000W
Lian Li P007 Case
Bookmarks