Quote Originally Posted by nicepun View Post
I'm reflashing through DOS with old Afudos 2.11 and the /pbnc /n swtiches.
I was reading the documents before.

Flash with

afudos /i2004.rom /p /b /n /c /reboot
Options
The optional field used to supply more information for flashing BIOS ROM. Following lists the supported optional parameters and format:
�� /P Program main bios image
�� /B Program Boot Block
�� /N Program NVRAM
�� /C Destroy CMOS after update BIOS done
�� /E Program Embedded Controller block if present
�� /K Program all non-critical blocks
�� /Kn Program n’th non-critical block only (n=0 - 7)
�� /Q Quiet mode enable
�� /REBOOT Reboot after update BIOS done
�� /X Do not check ROM ID
�� /S Display current system’s BIOS ROM ID
�� /Ln Load CMOS default (n=0 - 1)
L0: Load current CMOS optimal settings
L1: Load current CMOS failsafe settings
L2: Load CMOS optimal settings from ROM file
L3: Load CMOS failsafe settings from ROM file
�� /M<MAC Address> Update BootBlock MAC address if exists
�� /R Preserve all SMBIOS structures during NVRAM
programming
�� /Rn Preserve specific SMBIOS structure during
NVRAM programming