Hi!
I was wondering about the reservoirs...
What could be added to make it more than multioptional.
I am thinking this way...
What do you think?
The reservoir will be able to extend. with this link and another acrylic tube like on pictures...
Hi!
I was wondering about the reservoirs...
What could be added to make it more than multioptional.
I am thinking this way...
What do you think?
The reservoir will be able to extend. with this link and another acrylic tube like on pictures...
Originally Posted by creidiki
EKs are like waterblock pr0n
You already know what I think...
Is not exactly what I had in mind, but this design offers more flexibility
Last edited by MrToad; 07-31-2007 at 01:29 PM.
Good Idea. . Although since you pretty much have to mount them upright space would be a concern..
Maybe a bottom that would allow you to connect 2 side by side?
"Shake off all the fears of servile prejudices, under which weak minds are servilely crouched. Fix reason firmly in her seat, and call on her tribunal for every fact, every opinion. Question with boldness even the existence of a God; because, if there be one, he must more approve of the homage of reason than that of blindfolded fear."
Thomas Jefferson (1743-1826)
A sketch would be appreceated to understand fully.
EKs are like waterblock pr0n
Maybe make it so rev2 works Eddy as mines vorteking like aof acid more than the rev1's!
I like the idea of joining more togther but only good for a big case!
HOLY ****
Now that is extreme!
What about a 5 loop compatible version for extreme users, like us lol?
in other words could you add 2 more here:
This is what I came up with...
Not that I re-invented the wheel or something because Eddy was already thinking on what he's posted here today BEFORE I asked him if he could make this as a one-off:
By mrtoad at 2007-07-21
The reason why I asked for it is because it should make tube routing easier, and because it should help with the issue of air bubbles being sucked back by the
In my case space is not an issue because this is for my PC-343B, which I'm working on atm.
Very nice, but do you think you will do a low profile square version like the swiftech micro, but with the barbs in the same position as your cylindrical res?
Nice idea
Intel Core i7 930@ 4.0Ghz | Gigabyte EX58-UD4P | 3x2Gb OCZ 1600mhz | Palit GTX280 | 1TB Seagate | Samsung P2350 23'' | Silverstone Decathlon DA750W | Lian-Li PC777B | Logitech Z-5500 | Creative X-Fi| Iphone 4
Hardwarena Overclock Team
A modular reservoir system would be great! Bottoms/tops/middle pieces could be made to work with all kinds of things....such as a bottom that fits over a DDC!
465 Watts of Computing Power....Running Off the Sun.
**w00t for solar panels**
sweet idea Eddy
I love your block and everything else
Good Idea
I dont know you guys but I like the drives that can be inserted into the 5 1/4 bay
"Study hard my young friend"[/B].
---------------------------------------
Woody: It's not a laser! It's a... [sighs in frustration]
why dont you make a 2 in 1 res for dual loop systems; a really tall one, maybe double the size of 2 150ml ones.
then again, that would be really long and not fit in most cases.
hey, how about a LEVITATING reservoir using magnets. heh, a revolving one would make flow better i bet.
Anodized chrome copper tube maybe? Perhaps a better mounting system via hooks and the like without screws? Everytime I snap your acrylic res into those holders, I cringe. Just throwing ideas out there.
Asus Rampage Formula X48
Intel Q9650 @ 4.33GHZ
OCZ Platinum DDR2-800
Palit 4870x2
Creative Xi-Fi Extreme Music
Corsair HX1000
LL 343B Case
Thermochill 120.3
2xMCP355
KL 350AT
KL 4870X2 FC WB
DD Chipset Block
Is eddie's pic still up?
I can't get it to show for some reason.
Didn't last night for me either, but they are back now.
The Cardboard Master Crunch with us, the XS WCG team
Intel Core i7 2600k @ 4.5GHz, 16GB DDR3-1600, Radeon 7950 @ 1000/1250, Win 10 Pro x64
A figure 8 bottom, to take two cylinders, for dual loop builds?
Some sketchup models to download from your site would help us with planning our EK layouts.
I want to be able to try this or that and be thinking about my build. Not having to think and model three reservoirs to see how they fit in my layout.
He hein other words could you add 2 more here:
You can add as much as you want...
EKs are like waterblock pr0n
I was thinking of making a ddc top that would have the thread for EK reservoir. So the acrilic tube would screwed on the DDC top.
I don't think so...
EKs are like waterblock pr0n
Like that:
EKs are like waterblock pr0n
Like that:
Oh god, if the bleeding problem could be fixed on your Res Eddy, i'd get one of those if you'd release such Res\Top
You know, i think it is really something to see you here asking for opinion on your future projects\products. After all, we are the customers
• - Asus P8Z68-V PRO
• - Intel I5 2500k @ 4.5Ghz (for now)
• - Asus Geforce 580GTX DirectCUII Fermi
• - 16GB Corsair Vengeance Low Profile
• - Ultra X3 1000 Watt
• - Asus Xonar DX 7.1 \ Klipsch Promedia 2.1 THX
• - Corsair Vengeance 1300 Gaming Headset
• - Crucial M4 SSD 128GB \ WD Caviar Black 1TB
• - CoolerMaster 690II Advanced
• - Dell UltraSharp 24''
• - Noctua NH-D14
January - SLI Rig Of The Month (2008)
mad props to that design Eddy, i REALLY like that idea!!! you and petra should get talking about it, rather quickly i might add because i really think there is some potential in that design!Like that:
/major_agreeOh god, if the bleeding problem could be fixed on your Res Eddy, i'd get one of those if you'd release such Res\Top
You know, i think it is really something to see you here asking for opinion on your future projects\products. After all, we are the customers
EDIT:: forgot some quotes
wow interesting ideas...
Eddy you should do some artistic resevoirs combined with uber performance (which you obviously have down). If you take ur stuff and combine with the appearance of TribalOVERKILLS stuff you would have a work of art.
Posting Permissions
Reply With Quote
Bookmarks