Im gonna flash the BIOS to 1103 then. (I originally had 0602). Hopefully the BIOS wont be sluggish anymore but if it is I would like to know if anyone else with an updated BIOS and an 8800 GFX still gets a sluggish BIOS so I can know that the Motherboard is actually not defected.

I thought enabling OS/2 was if your running with more than 64 mb of ram? I guess I'm completely wrong and confused for that area. il go ahead and put it back to [Non-OS2] then. In What scenario would I want to enable OS/2 for then? Please explain! : (

No the board doesnt correctly detect the corsair timings. It picks up 5-4-4-17 2T in CPUZ so Im gonna manually change it to what they say which is 5-5-5-12 (As for 2T it sais nothing about that so Il just leave it at auto which it was already at 2T). Do you think I should just manually set the command rate then? As for the voltage I already adjusted it as you said. I put 2.050v and the Monitor in the BIOS now shows it fluctuating from 2.09v to 2.11v but in PC probe it just gives a stable 2.10v and it rarely goes to 2.11v.

As for my Lite On, Im gonna go ahead and RMA that as well since I dont want it messing up in the future as you said.

And no, I havent overclocked at all. EVerything is all stock other than the video card which was preclocked. Core Clock 500MHz to 576MHz and Memory Clock 1600MHz to 1700Mhz.

Il run all the tests after I updated Bios. I hope this works. And everything in system manager has been recognised properly.

As for the CPU. Do you think I should RMA that as well? When i said "chipped" in the previous post. Its not missing a piece..Its kinda like is if someone got sand paper and sanded it down where it gets from Green to yellowish.. But of course its very small from 0.1 to 0.2mm

Thanks for all the help btw.