MMM
Results 1 to 25 of 147

Thread: Q6600 or E6850 ? Best mobo for Q660? - Consolidated thread

Threaded View

  1. #28
    Xtreme Member
    Join Date
    Jun 2006
    Posts
    415
    strange|ife G0's are out now but most of the chips are b3's, so you can check the numbers on mwave (currently they are b3's) or try to get luck with newegg, or preorder with tank guys (only guarantee), or if you have a fry's or microcenter or someting local you can always look through their inventory and see if they have any G0's.

    Still trying to decide, striker vs p5k or some other p35 board, or if x38 is out in the next two weeks. Main issue is highest fsb possibly with my watercooling (though switching to an apogee gtx over my storm) and with my memory (might switch out the 2gigs of ocz and go with another 4 of the patriot so its all the same, but only realy need just over 4 gigs in general so 8 would be kind of silly). I am wondering if the unlinked memory on teh striker will make more of a difference for me then the higher likely maximum fsb of the p5k (since I cant see getting it over 450fsb with water anyway (on anyboard), 4ghz would be great, 3.6 or higher would be pretty good).
    Last edited by jkresh; 07-22-2007 at 04:48 PM.
    Xigmatek elysium
    i7 920, 4.2 at 1.32v 60C after 24 hours prime 95
    asus p6t6 ws revolution
    4870 1gb
    6gigs ddr3 1600
    x25-160 g2, velociraptor 300gig, 4x 2tb hitachi 7200rpm on an lsi 9260-81
    lg bd/hdvd combo
    apogee xt rev 2.0, swiftech 360, 240 with 4 sanyo denki's
    and 1 scythe (25mm did not have space for another 38mm)
    2 d5's in a koolance 425x2 res

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •