Official GIGA P35-S3/DS3/DS3R/DS3P/DS4/DQ6 bios/info thread

[Burner27]

With E6600 at default (9x266) set it too 3.00 (266/2*3=400mhz) If you set FSB to 400 for example its 2.00 (1/1) and so on.

Yup, that worked.

So why does SPD settings set it to 533Mhz? or 1:2?

[Klimpen]

I have created a BIOS-Template for the P35-DQ6.
I had one for my previous DFI motherboard and it a very good tool
to understand, remember and share you tweaks and settings in BIOS.

Three versions available
Word 2007 format
Word 97-2003 format
PDF format

Zip-file with all three - HERE
PDF-File only - HERE

To copy'n paste here on the forum:

Robust Graphic Booster:
CPU Clock Ratio:
CPU Host Clock Control:
CPU Host Frequency:
PCI Express Frequency:
C.I.A.2:
System Memory Multiplier (SPD):
Memory Frequency (MHz):
High Speed DRAM DLL Settings:
Performance Enhance:
DRAM Timing Selectable (SPD):
#CAS Latency Time:
#DRAM RAS# to CAS# Delay:
#DRAM RAS# Precharge:
#Precharge Delay (tRAS):
#ACT to ACT Delay (tRRD):
#Bank WRITE to READ Delay:
#Write to Precharge Delay:
#Refresh to ACT Delay:
#Read to Precharge Delay:
#tRD:
#tRD Phase Adjustment:
System Voltage Control:
DDR2 OverVoltage Control:
PCI-E OverVoltage Control:
FSB OverVoltage Control:
(G)MCH OverVoltage Control:
CPU OverVoltage Control:
Normal CPU Vcore:

I also took a simple shot with my camera of every BIOS page. If anyone would like to refer to a certain setting or such - download here