Page 1 of 3 123 LastLast
Results 1 to 25 of 73

Thread: E6850 Retail Water

  1. 07-17-2007, 08:07 PM #1
    road-runner
    road-runner is offline
    Xtreme Cruncher
    Join Date
    May 2007
    Location
    Conroe, Texas
    Posts
    3,010

    E6850 Retail Water

    Got my E6850 today I have not had much time to fool with it yet but I did run OCCT at 4Ghz 1.55 vcore. 4401 at 1.65 volts. TAT does not report the temps right with this cpu or it may be the board? It read right with my E6600. It was reading idle 18-20c in 25c ambient and 32-33c load. I am folding with the SMP core at 4Ghz


    Reply With Quote Reply With Quote
  2. 07-17-2007, 08:27 PM #2
    Start
    Start is offline
    Xtreme Enthusiast
    Join Date
    Jun 2007
    Posts
    546
    *Drools 4.4Ghz*
    Reply With Quote Reply With Quote
  3. 07-17-2007, 08:38 PM #3
    road-runner
    road-runner is offline
    Xtreme Cruncher
    Join Date
    May 2007
    Location
    Conroe, Texas
    Posts
    3,010
    Thats not stable, its a suicide run at 1.65 volts

    Reply With Quote Reply With Quote
  4. 07-17-2007, 08:45 PM #4
    safan80
    safan80 is offline
    I am Xtreme
    Join Date
    Oct 2004
    Location
    U.S.A.
    Posts
    4,743
    Quote Originally Posted by SP33DFR34K View Post
    *Drools 4.4Ghz*
    don't you mean 4.004Ghz


    Asus Z9PE-D8 WS with 64GB of registered ECC ram.|Dell 30" LCD 3008wfp:7970 video card

    LSI series raid controller
    SSDs: Crucial C300 256GB
    Standard drives: Seagate ST32000641AS & WD 1TB black
    OSes: Linux and Windows x64
    Reply With Quote Reply With Quote
  5. 07-17-2007, 08:48 PM #5
    Start
    Start is offline
    Xtreme Enthusiast
    Join Date
    Jun 2007
    Posts
    546
    Quote Originally Posted by road-runner View Post
    Thats not stable, its a suicide run at 1.65 volts
    There might be potential with more tweaking.

    Quote Originally Posted by safan80 View Post
    don't you mean 4.004Ghz
    I was refering to the sucide run
    Reply With Quote Reply With Quote
  6. 07-17-2007, 10:22 PM #6
    michaLcoughliN
    michaLcoughliN is offline
    Xtreme Member
    Join Date
    May 2007
    Location
    Burlington Ontario
    Posts
    365
    Send a message via MSN to michaLcoughliN
    4ghz is still pimp
    Reply With Quote Reply With Quote
  7. 07-17-2007, 10:24 PM #7
    Solarfall
    Solarfall is offline
    Xtreme Guru
    Join Date
    Jun 2006
    Location
    Finland, joensuu
    Posts
    3,527
    Send a message via AIM to Solarfall Send a message via MSN to Solarfall
    nice.. your chip performs pretty much the same way as my e6600
    Evga X58 sli under cascade
    http://www.xtremesystems.org/forums/...d.php?t=219788
    Evga X58 Sli ultimate overclocking/ overview/ discussion thread
    http://www.xtremesystems.org/forums/...d.php?t=221082


    proud owner of E8600 Q822A435
    Reply With Quote Reply With Quote
  8. 07-17-2007, 11:13 PM #8
    OBR
    OBR is offline
    Banned
    Join Date
    Dec 2005
    Location
    Everywhere
    Posts
    1,715
    Is it fully Orthos stable at this freq? If not, what max stable freq is?
    Reply With Quote Reply With Quote
  9. 07-18-2007, 11:41 AM #9
    road-runner
    road-runner is offline
    Xtreme Cruncher
    Join Date
    May 2007
    Location
    Conroe, Texas
    Posts
    3,010
    Quote Originally Posted by OBR View Post
    Is it fully Orthos stable at this freq? If not, what max stable freq is?
    I have not had time to test it yet, I will test it though...

    Reply With Quote Reply With Quote
  10. 07-18-2007, 11:42 AM #10
    Grinch
    Grinch is offline
    Xtreme Cruncher
    Join Date
    Jun 2005
    Location
    Lakeland,FL
    Posts
    2,536
    where did you get cpu from?
    750W Thermaltake Modular PSU
    DFI UT X58-T3eH8
    Core i7 920 @ 20 X 200 1.325V
    CORSAIR XMS3 DHX 4GB (2 x 2GB) DDR3 1600
    768 MB EVGA 8800GTX
    1 X 36GB WD Raptor
    2 X 150GB WD RAPTORS
    1 X SpinPoint P Series SP2504C 250GB
    1 X Maxtor 6L300S0 300GB
    16 X NEC DVD Burner
    7 120mm Yate Loon LED Intake Fan
    4 120MM Yate Loon Exhaust Fan
    28" HANNSPREE Monitor

    Watercooling Loop:

    1 X PA120.3
    1 X PA120.2
    2 X Laing DDC's w/EK-DDC Dual Turbo Top
    7 X Yate Loon Blue LED Intake Fans
    4 X Yate Loon Blue LED Exhaust Fans
    1 X Swiftech GTZ
    1 X GPU EK Fullcover Waterblock
    1 X XSPC Dual Bay Reservoir 5.25" with Bubble Window
    Reply With Quote Reply With Quote
  11. 07-18-2007, 04:43 PM #11
    road-runner
    road-runner is offline
    Xtreme Cruncher
    Join Date
    May 2007
    Location
    Conroe, Texas
    Posts
    3,010
    Quote Originally Posted by Grinch View Post
    where did you get cpu from?
    http://www.allstarshop.com/shop/prod...d=fg&pid=18149

    Reply With Quote Reply With Quote
  12. 07-18-2007, 05:39 PM #12
    erwinz
    erwinz is offline
    Xtreme Addict
    Join Date
    May 2006
    Location
    Philippines ^_^
    Posts
    1,618
    nice..

    mm... can you please try 8x500

    and check your stability please..

    thanks
    Asus P5W64 WS Professional , DFI Infinity 965P-S (testing)
    X6800 , E6750 es
    Micron Fatbodies , Micron D9gkx oem, Crucial 8000, Crucial Tracer 8500 (incomming)
    Ati FireGL V5100, Elsa FireGL V3100
    water cooling setup (EK 775 cpu block, swiftech NB Block, Swiftech pump, BI dual pass dual 120mm)
    Silverstone OP650
    raptors, baracuda
    Reply With Quote Reply With Quote
  13. 07-18-2007, 05:48 PM #13
    Grinch
    Grinch is offline
    Xtreme Cruncher
    Join Date
    Jun 2005
    Location
    Lakeland,FL
    Posts
    2,536
    Quote Originally Posted by road-runner View Post
    http://www.allstarshop.com/shop/prod...d=fg&pid=18149
    great! that's just where I ordered my 6850 from today...
    750W Thermaltake Modular PSU
    DFI UT X58-T3eH8
    Core i7 920 @ 20 X 200 1.325V
    CORSAIR XMS3 DHX 4GB (2 x 2GB) DDR3 1600
    768 MB EVGA 8800GTX
    1 X 36GB WD Raptor
    2 X 150GB WD RAPTORS
    1 X SpinPoint P Series SP2504C 250GB
    1 X Maxtor 6L300S0 300GB
    16 X NEC DVD Burner
    7 120mm Yate Loon LED Intake Fan
    4 120MM Yate Loon Exhaust Fan
    28" HANNSPREE Monitor

    Watercooling Loop:

    1 X PA120.3
    1 X PA120.2
    2 X Laing DDC's w/EK-DDC Dual Turbo Top
    7 X Yate Loon Blue LED Intake Fans
    4 X Yate Loon Blue LED Exhaust Fans
    1 X Swiftech GTZ
    1 X GPU EK Fullcover Waterblock
    1 X XSPC Dual Bay Reservoir 5.25" with Bubble Window
    Reply With Quote Reply With Quote
  14. 07-18-2007, 07:22 PM #14
    G H Z
    G H Z is offline
    ¿
    Join Date
    Jul 2003
    Posts
    4,772
    Very nice chip road-runner. I wonder if these can do over 600 FSB, everything would be perfect then
    Reply With Quote Reply With Quote
  15. 07-19-2007, 09:00 AM #15
    road-runner
    road-runner is offline
    Xtreme Cruncher
    Join Date
    May 2007
    Location
    Conroe, Texas
    Posts
    3,010
    If I go any higher than this I get reboots after about an hour of running. I even tried up to 1.6 volts. This is 1.55 volts.


    Reply With Quote Reply With Quote
  16. 07-19-2007, 09:39 AM #16
    irangan
    irangan is offline
    Registered User
    Join Date
    May 2007
    Location
    Malaysia
    Posts
    37
    Send a message via MSN to irangan
    mind telling me your processor batch code?
    Reply With Quote Reply With Quote
  17. 07-19-2007, 09:42 AM #17
    road-runner
    road-runner is offline
    Xtreme Cruncher
    Join Date
    May 2007
    Location
    Conroe, Texas
    Posts
    3,010
    Quote Originally Posted by irangan View Post
    mind telling me your processor batch code?
    No I sure dont, its L718A190

    Reply With Quote Reply With Quote
  18. 07-19-2007, 09:56 AM #18
    irangan
    irangan is offline
    Registered User
    Join Date
    May 2007
    Location
    Malaysia
    Posts
    37
    Send a message via MSN to irangan
    Thanks.... Something to compare with my E6850. It is coming in 2 days time. Hehe
    Reply With Quote Reply With Quote
  19. 07-19-2007, 09:58 AM #19
    michaLcoughliN
    michaLcoughliN is offline
    Xtreme Member
    Join Date
    May 2007
    Location
    Burlington Ontario
    Posts
    365
    Send a message via MSN to michaLcoughliN
    nicely done road runner
    Reply With Quote Reply With Quote
  20. 07-19-2007, 10:12 AM #20
    road-runner
    road-runner is offline
    Xtreme Cruncher
    Join Date
    May 2007
    Location
    Conroe, Texas
    Posts
    3,010
    Quote Originally Posted by G H Z View Post
    Very nice chip road-runner. I wonder if these can do over 600 FSB, everything would be perfect then
    I tried to boot at at 566X7 and no go. I think my 6400 HZ can not go that high. Currently running 500X8 for 45 minutes...
    Last edited by road-runner; 07-20-2007 at 11:51 AM.

    Reply With Quote Reply With Quote
  21. 07-20-2007, 11:33 AM #21
    Console
    Console is offline
    Xtreme Member
    Join Date
    Jan 2005
    Posts
    280
    Quote Originally Posted by road-runner View Post
    I tried to boot at at 566X7 and no go. I think my 6400 HZ can not go that high. Currently running 500X8 for 45 minutes...
    They should do 566 fine as long as you give them some volts =)
    E6420 @ 8x499 (Clock Gen After That)
    P5K Deluxe (Looking for mods to get me over 530 FSB)
    2x1gig Ballistix 600Mhz @ 5-5-5-10 2T
    Corsair 620hx
    Evga 8800gts 320mb @ 676/1050 Vgpu@ 1.45v Vmem @ 1.9v
    Reply With Quote Reply With Quote
  22. 07-20-2007, 11:40 AM #22
    Gautam
    Gautam is offline
    Admin
    Join Date
    Dec 2003
    Location
    Hillsboro, OR
    Posts
    5,225
    Send a message via AIM to Gautam Send a message via MSN to Gautam
    The board is what'd become difficult at such a level.
    Reply With Quote Reply With Quote
  23. 07-20-2007, 11:52 AM #23
    road-runner
    road-runner is offline
    Xtreme Cruncher
    Join Date
    May 2007
    Location
    Conroe, Texas
    Posts
    3,010
    Something causes a random reboot occasionally even at speeds that run orthos 11 hours or OCCT and have been folding for 24/7, it may go a day or two with no problems then just reboot. I am not sure what it is yet, any ideas?

    Reply With Quote Reply With Quote
  24. 07-21-2007, 03:06 PM #24
    Dynasty
    Dynasty is offline
    Xtreme Addict
    Join Date
    Jun 2004
    Posts
    1,280
    4400mhz screenie very nice cpu m8......

    8800 ultra sli 06
    8800 gTx sli 03
    Reply With Quote Reply With Quote
  25. 07-21-2007, 04:26 PM #25
    K.I.T.T.
    K.I.T.T. is offline
    Xtreme Addict
    Join Date
    Jun 2005
    Location
    Durham University, UK
    Posts
    1,143
    Is that 33*C dual load with 1.6v? Nicely done mate
    The rig
    CPUs: E6300 ES B0 @ 3220 MHz w/1.35v orthos stable | E6600 B2 @ 3400 MHz w/1.43v --> Sold | Xeon 3050 L2 @ 3304 MHz w/1.45v orthos stable
    MoBo: Asus P5K-E WiFi-AP @ 520 x * orthos stable
    Graphics: 256 MB Connect 3D Radeon X1900XT @ 661/828 (core/mem)
    RAM: 2 x 1 GB Team Xtreem PC2 5300 @ DDR1010 4-4-4-8 / DDR1100 5-5-5-12 w/2.25v orthos stable
    HDDs: 300 GB (16 MB Cache) and 80 GB Maxtor Diamondmax 10 drives
    Optical: NEC ND3500AG DVD +/- RW
    PSU: Antec True Power 2.0 550W
    H2O
    Swiftech MCR220-QP | Laing D5 | AquaXtreme MP-05 Pro LE | DangerDen Maze 4 LP | 2 x 120mm NoiseBlocker SX1 fans
    Lappy
    MSI MS1022 14.1" Widescreen Barebone | Celeron-M 360 1.4 GHz @ 1.86 GHz / Pentium M 715A | GeForce 6200 Go | 80 GB Fujitsu HDD | Sony DVD +/- RW
    Waiting for
    Nehalem
    Reply With Quote Reply With Quote
Page 1 of 3 123 LastLast
« Previous Thread | Next Thread »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules