The Stealth has been revised. It has major flow and better GPU cooling power.
Have a read.
http://www.swiftech.com/forums/viewtopic.php?t=189
OPP
The Stealth has been revised. It has major flow and better GPU cooling power.
Have a read.
http://www.swiftech.com/forums/viewtopic.php?t=189
OPP
Craaap, now I don't know whether I should go with the Stealth or EK.
convex gpu block?
“You Americans are so gullible. No, you won’t accept communism outright, but we’ll keep feeding you small doses of socialism until you’ll finally wake up and find you already have communism. We won’t have to fight you. We’ll so weaken your economy until you’ll fall like overripe fruit into our hands." Nikita Khrushchev
Hmmm...
Comparing the Flow Rate vs Pressure Drop graphs of the "vanilla" and the V2, I can't help but say WOW.
The restriction is now much more reasonable. Looking forward to some thermal resistance data.
You might even make me undo three hours of mounting MC14/21s now that I'm keen on volt modding my 8800 GTX.
I'm in the same boat, just biding my time for something to come out.Craaap, now I don't know whether I should go with the Stealth or EK.
Originally was after the EK blocks, but since it'll be months before Petra's will get them back in stock, the new Stealth sure does look more appealing now.
Did you see the temp comparisons on this page?
http://www.swiftech.com/forums/viewtopic.php?t=188
OPP
I just have.
I was so focused on the graph that I didn't notice the temps in the latter part of gabe's post...
If you already have a properly installed MCW60 and you're not planning on volt modding your card there might be no point on upgrading the block.
However, if like myself you feel tempted by the soldering iron and you foresee that unless some ghastly incident happens the card is going to stay in your rig for another year or so IMHO is well worth it.
Wow, Stealth v.1 = 5.5mH2o @ 1.5 GPM
Stealth v.2 = 1.1mH2o @ 1.5 GPM
That is quite impressive.
*:-.,_,.-:*'``'*:-.,_,.-:*'``'*:-.,_,.-:*'``'*:-.,_,.-:*'``'*:-.,_,.-:*
GTZ --> MCW-NBMAX --> EK FC --> PA 120.3 --> PA 160.1 --> 2x DDC Ultras in Series --> Custom Clear Res
"Artificial intelligence is no match for natural stupidity."
*:-.,_,.-:*'``'*:-.,_,.-:*'``'*:-.,_,.-:*'``'*:-.,_,.-:*'``'*:-.,_,.-:*
*:-.,_,.-:*'``'*:-.,_,.-:*'``'*:-.,_,.-:*'``'*:-.,_,.-:*'``'*:-.,_,.-:*
GTZ --> MCW-NBMAX --> EK FC --> PA 120.3 --> PA 160.1 --> 2x DDC Ultras in Series --> Custom Clear Res
"Artificial intelligence is no match for natural stupidity."
*:-.,_,.-:*'``'*:-.,_,.-:*'``'*:-.,_,.-:*'``'*:-.,_,.-:*'``'*:-.,_,.-:*
whats going to be the MSRP on these rev2s ?
Is the preferred method still the two T connectors?
I wonder if there will be a similar revision to the MCW60?
Phenom 9950BE @ 3.24Ghz| ASUS M3A78-T | ASUS 4870 | 4gb G.SKILL DDR2-1000 |Silverstone Strider 600w ST60F| XFI Xtremegamer | Seagate 7200.10 320gb | Maxtor 200gb 7200rpm 16mb | Samsung 206BW | MCP655 | MCR320 | Apogee | MCW60 | MM U2-UFO |
A64 3800+ X2 AM2 @3.2Ghz| Biostar TF560 A2+ | 2gb Crucial Ballistix DDR2-800 | Sapphire 3870 512mb | Aircooled inside a White MM-UFO Horizon |
Current Phenom overclock
Max Phenom overclock
look, we have never done this before, I mean releasing a revision that early behind the original release.. and I feel pretty bad about it.
So we are going to do this: We'll give $40 off the purchase of Rev2 for anyone who owns the original. This is a factory direct deal. Just turn in your original invoice to michelle, and we'll ship you the Rev 2. As usual, this offer is valid for 30 days effective ship date of Rev 2 on July 23.
CEO Swiftech
hmm, this is something we should certainly consider. But it's more complicated. The top is injection moulded, which will require either a revision or a new mold.
right now, were completely focused on the new line of products coming up at the end of month. so were' pretty busy.
But I agree that we should put this on the agenda.
CEO Swiftech
My Heat
i5 2500k @4.5ghz Raystorm
Asus P8Z68-V Pro/Gen3 16gb(4x4) G.Skill PC12800 Ripjaws X
x1900xt MCW60
Rad: Thermochill PA120.3 3YL SL/ Pump: DDC2 w/ Petra's top 7/16in ID masterkleer
Corsair 120gb Force GT SSD/ 1TB WD Black Caviar SATA
X-Fi music/SH-203B/H62L/LH-20A1L
Corsair HX620w /Acer AL2223W/modded TJ07
Pictures? ^^
I want to see a full coverage block for the R600 still...
Core i7 920 D0 B-batch (4.1) (Kinda Stable?) | DFI X58 T3eH8 (Fed up with its' issues, may get a new board soon) | Patriot 1600 (9-9-9-24) (for now) | XFX HD 4890 (971/1065) (for now) |
80GB X25-m G2 | WD 640GB | PCP&C 750 | Dell 2408 LCD | NEC 1970GX LCD | Win7 Pro | CoolerMaster ATCS 840 {Modded to reverse-ATX, WC'ing internal}
CPU Loop: MCP655 > HK 3.0 LT > ST 320 (3x Scythe G's) > ST Res >Pump
GPU Loop: MCP655 > MCW-60 > PA160 (1x YL D12SH) > ST Res > BIP 220 (2x YL D12SH) >Pump
I actually think Swiftech have the most customer focused business model out there! I love it, look forward to seeing some R600 blocks , but get this out the door first and then use what you learnt to make that for me
FX8350 @ 4.0Ghz | 32GB @ DDR3-1200 4-4-4-12 | Asus 990FXA @ 1400Mhz | AMD HD5870 Eyefinity | XFX750W | 6 x 128GB Sandisk Extreme RAID0 @ Aerca 1882ix with 4GB DRAM
eXceed TJ07 worklog/build
Bookmarks