ASUS Striker Exteme 1202 BIOS Support Wolfdale CPU.

[sxs112]

BIOS version: 1202 Date:05/23/2007

Checksum: A800H

01.Update NV RAID ROM to 6.98
02.Update NVMM to 4.A72.24
03.Support wolfdale CPU.
04.Release EZflash B322
05.Add microcode not found & update fail message.
06.Modify CPU fan speed warning item value.

ASUS Striker Exteme 1202 BIOS

FTP

[HamidFULL]

interest ... I bet 965P support Penryn (Wolfdale/Yorkfield)

[Verisimilitude]

That would be great. But at the moment the official word is 965 does NOT support 45nm. Here's to hoping though.

[HamidFULL]

That would be great. But at the moment the official word is 965 does NOT support 45nm. Here's to hoping though.

but you know Asus P5PE-VM or similar boards its based on 865PE and Support E600 and Q6600 and higher
of course I think 865PE + E6000 can take advatage of E6000 but I think 965P + Penryn is a full support

[FischOderAal]

That would be great. But at the moment the official word is 965 does NOT support 45nm. Here's to hoping though.

only 965? would be funny, because 975X is way older... and the first Penryn Benchies were run on a modified Bad Axe

I just hope my P5W will run Wolfdale just fine

good luck to everyone

[HamidFULL]

only 965? would be funny, because 975X is way older... and the first Penryn Benchies were run on a modified Bad Axe

I just hope my P5W will run Wolfdale just fine

good luck to everyone

Whats Exactly means of modified Bad Axe?

[Mikesnav]

I read whether 965 supports 45nm or not is a marketing/sales question, rather than a technical one

[flutie98]

its also a question of PWM voltage regulation implemented on the specific 965 board, penryn implements a new standard...

[turtletrax]

Whats Exactly means of modified Bad Axe?

The Intel 975xbx R.303 (I think) did not support the C2D family without a hard mod. I think there is a huge thread by FCG about how to mod the R.303 to run the C2d. Same thing goes for penryn. Had to be modded to work.

Edit: here is the FCG thread http://www.xtremesystems.org/forums/...ght=975xbx+mod

[safan80]

still no new bios update for the p5n32-e SLI plus.

[adamsleath]

good to hear

[californian7856]

wow 45nm?? maybe my evga 680i have a chance

[triple_A]

wow 45nm?? maybe my evga 680i have a chance

Yeah i'm kinda hoping that nvidia 680i/650i chipsets will be compatible with Wolfdale.

[HamidFULL]

Yeah i'm kinda hoping that nvidia 680i/650i chipsets will be compatible with Wolfdale.

its compatible I read at Anand that nForce 600i are wolfdale 1333 ready!

The Intel 975xbx R.303 (I think) did not support the C2D family without a hard mod. I think there is a huge thread by FCG about how to mod the R.303 to run the C2d. Same thing goes for penryn. Had to be modded to work.

Edit: here is the FCG thread http://www.xtremesystems.org/forums/...ght=975xbx+mod

Thanks

[californian7856]

hey if striker supports wolfdale .. does it mean it also supports yorkfield the 45nm quad core ??

[HamidFULL]

hey if striker supports wolfdale .. does it mean it also supports yorkfield the 45nm quad core ??

yes it support with BIOS update

[FischOderAal]

The Intel 975xbx R.303 (I think) did not support the C2D family without a hard mod. I think there is a huge thread by FCG about how to mod the R.303 to run the C2d. Same thing goes for penryn. Had to be modded to work.

Edit: here is the FCG thread http://www.xtremesystems.org/forums/...ght=975xbx+mod

well, but what do you want to mod? since the new VRM will be introduced with Nehalem a simple Bios-Update _should_ be enough for EVERY Conroe-Rdy Board.

I don't know why the Penryn Benchies were made on an modified Bad Axe.

[californian7856]

then maybe, just maybe, many people with EVGA 680i A1 can run Yorksfield without changing mobo

i think as long as a board can run wolfdale it should run the quad core derivative (which has the sam VRM i think) without much trouble

also i think some guy work at intel said in this forum that Yorksfield dont have VRM11.1 ... it has VRM11 , but he said that a board supports conroe/kentsfield doesnt mean it supports wolf/yorkrsfield as there r some bios update need to be done ,... or something like that

here:
http://www.xtremesystems.org/forums/...highlight=680i

FLG_Poncho

[L1m1t.NL]

I've seen the Bad Axe 2 Penryn rig running the new Intel Yorkfield processor on Youtube. You can see it's a Bad Axe 2 and it's also mentioned at the ending.

See for yourselves...

Or here...