MM U2-UFO and Horizon: The never ending 2 in 1 worklog (56k warning)

[ranker]

A quick update for those asking about how I setup my drain line:

The best design for a drain line is as follows:

Use a T line near the lowest part of your loop. Right off the T-line, add a small-sized quick disconnect (http://www.sharkacomputers.com/alqudicog1th.html). However, leave the other half of it off. Now connect the other half of the quick disconnect first to an alphacool ball valve (http://www.performance-pcs.com/catal...ucts_id=20601), and then to a DD fill port.

Basically it WON'T clutter your case and you can always drain it by simply connecting the other half of the quick disconnect, opening the fill port, and then turning the ball valve. Viola, instant drain line without taking up the space of a drain line.

very nice looking ranker....*-)

Thanks Grinch,

I'm curious about your Vcore setting for your e6600. To get to 3.6Hz stable on one of my chips, I've had to push it to 1.5 Bios (1.47 vdroop).