EK Waterblocks and EVGA n680i

[hecktic]

There are no problems with this block and the 8800GTX's. This was the only block with a profile small enough to fit directly under an 8800GTX. The MCW30 can also work in an SLI configuration. It doesn't fit "directly" underneath the 8800 but positions itself in a manner that it won't interfere with a WC'd 8800GTX. The EK NF4 1.1 will work with an aircooled 8800GTX unlike the MCW30. This was the deciding reason that had me replace all my MCW30's with the EK blocks (however the MCW30's are just as good).

What about the mounting issue with that washer making contact with the vreg? or was that only DD 680i ?

I use a combination of Vantec 120mm vibration dampening kits for all of my LED yates since they match well with the fan color. On my internal fans (Sharkoon Golfball 2000's), I use the black fan gasket since those fans are black. You can see some of the fan gaskets on top of the cables as I had just removed the fans and the hard drives connected to them prior to taking the picture.

OoOooOoo please provide some links to these items.... I did not think you could mount 120mm fans to the PA 120.3 with the rubber type gaskets on both back and front... please provide some links to these products and if you are kind enough to also post some close up pictures

And yes that's an EK evga 680i NB block.

Its nice to know someone else did this since I have the DD 680i which I will be using on the NB or MCP and I will be using the EK evga 680i on the SB or SPP. I think this will be SLI compatible on air or water...I hope at least...

EDIT: Ranker, what about the R50s or the MOSFETs ... arent you going to do something about those?