Hey what is the name of that Black and Orange fan your using for your CPU cooler? Is it any quiet?Originally Posted by chensen78
here's mine
Hey what is the name of that Black and Orange fan your using for your CPU cooler? Is it any quiet?here's mine
|Asus P5N-E SLI |E4300 (1.8Ghz) |PNY 9600GT 512mb |
|Corsair 2GB XMS2 DDR2 675 |Corsair HX 520W Power Supply |Hitachi 7200RPM SATA2 Hard-Drive |
It's definitely a ThermalTake fan...I'm assuming it's the one from a Big Typhoon (probably his previous cooler). Can't say anything about the noise as I've never had one, but if you want a fan, grab an S-Flex SFF21F
Intel E6600 (L630F)
Gigabyte P35-DS3P
2 x 1gb Crucial Ballistix 1066
ASUS EN7800GTX
2 x 250gb WD 2500KS in RAID-0
OCZ Powerstream SLi 520
CM Centurion 5
standard thermaltake fan (for case/hs) - no they r not that quiet, there definitely better fans re: noise out there..
DNA = Design Not Accident
DNA = Darwin Not Accurate
heatware / ebay
HARDWARE I only own Xeons, Extreme Editions & Lian Li's
https://prism-break.org/
Hey, my first post and here's my rig:
CPU: Core2Duo e4300 @ 3ghz w/Noctua NH-U12F cooler
Mainboard: Gigabyte GA-965P-S3
Memory: 2x 1gig G.Skill PC5300 w/silver heatspreaders
Hard Drives: Seagate 160gb sata, Samsung 160gb sata
Video Card: Leadtek 7900GS @ 520/1400
Optical: LiteOn DVDRW
Monitor: Viewsonic VX2025WM 20.1" WS
Keyboard / Mouse: Logitech S510 / Logitech G7
Case: Gigabyte Poseidon
PSU: Thermaltake 600W Toughpower
Speakers: Logitech X-530 5.1
Sound card: Creative SB Audigy Value
Headphones: Beyerdynamic DT231PRO
Last edited by AusScare; 07-05-2007 at 04:41 AM.
welcome and can u please state the spec of ur rig, even in ur signature
Soon to be :
ASUS P8P67 Deluxe, Intel SB i7-2600k, G.Skill Rj-X F3-12800CL6D-4GBXH, MSI HD6950 2GB, Corsair 750AX, Intel 80GB G2 SSD, DELL U2410
Used to be: SaFrOuT
Thanks and donewelcome and can u please state the spec of ur rig, even in ur signature
e4300 @ 3ghz | 965P-S3 | G.Skill 2x1gb PC5300 | Leadtek 7900GS 520/1400 | Seagate 160gb sata |
Samsung 160gb sata | SB Audigy Value | TT Toughpower 600W | Thermaltake Soprano | Noctua NH-U12F |
Nice wires
what do you mean 'international' ?
Got me new case yesterday. Antec 182B. And im very happy with it.
"The flames of freedom. How lovely. How just. Ahh, my precious anarchy.."
is the chipsetfan not actually needlessly?
You meen if i need the fan over the NB?
Yes i do. If i dont have any fan over the NB it will get very hot (hot in sense that i cant hold my finger on the cooler more than 5sec) and im only running 1,25v on the NB. Then again i run high FSB (460), so maybe thats have something to do that the NB getting hot. But i will get Noctua NC-U6 or Thermalright HR-05 soon.
Last edited by DataNusse; 07-05-2007 at 11:04 AM.
"The flames of freedom. How lovely. How just. Ahh, my precious anarchy.."
SeLecT lawl at the monkey
Yeh that Monkey made me lol
@Datanusse: Fanless cpu cooler but bodged on nb fan?
Core 2 Quad Q6600 @ 3GHz . DFI DK P45-T2RS Plus . XFX 9800GT 512MB . 8GB OCZ Blade PC2-9200 . WD6400AAKS AHCI .
Creative X-Fi XtremeMusic . Hanns.G 28" LCD . Thermalright U120-E . Seasonic S12 600w . Windows 7 Professional E Retail x64 .
Well the cpu cooler is not burning hot. But NB is if its fanless. But i will get a better cooler for nb.@Datanusse: Fanless cpu cooler but bodged on nb fan?
"The flames of freedom. How lovely. How just. Ahh, my precious anarchy.."
Antec P182 fits triple rad in top?
at least seems yes
dont believe so (without mod) maybe you mean the 190?Antec P182 fits triple rad in top?
at least seems yes
Gaming Rig
Intel E6300
Intel Mobo
2 Gig OCZ 800 (800 5,5,5,15)
Saphire Ati 4870
22inch LG Flatron W2230S
yes with mods, looking at this 120mm top fan, seems that is possible to put a triple rad inside, but i dont know what im talking...im just imagining
Select, I love the look of the Monkey
Beutiful rig...
CPU: Intel Core 2 Due E6600 @ 3.6GHz (24\7)|| HS: Scyth Ninja Plus + 120mm Thunderblade
MB: Asus P5W DH Deluxe|| Memory: G.Skill 4096MB 800MHz 5-5-5-15
GFX: BFG GeForce 9800GTX OCX 512MB 256MB|| HD: Western Digital 500GB SataII
Power Suplly: Enermax Liberty 400Watt|| Case: HEC Compucase 6920
Fans: Thermaltake Thunderblade 120mm Blue LED|| Monitor: Sony Bravia BX4 37" FHD
heres my babe
Case-Coolermaster Cosmos S
MoBo- ASUS Crosshair IV
Graphics Card-XFX R9 280X [out for RMA] using HD5870
Hard Drive-Kingston 240Gig V300 master Seagate 160Gb slave Seagate 250Gb slave Seagate 500Gb slave Western Digital 500Gb
CPU-AMD FX-8320 5Ghz
RAM 8Gig Corshair c8
Logitech 5.1 Z5500 BOOST22
300Gb of MUSICA!!
Steam ID: alphamonkeywoman
http://www.techpowerup.com/gpuz/933ab/
Mine
Rig #1
DFI UTNF4 SLI Dr Expert (Bios 04/06)
AMD64 3500+ @2.8
G.Skill F1-4000B1U2 2GB (3-3-3-7 1T @2.7v)
2 Enermax Liberty 620w PSU's
Leadtek PX7800GT (2 SLI )
Rig #2
DFI LPUT NF590 SLI M2R/G
Amd64 X2-6000+
G.Skill F@-6400PHU2-2GBHZ (4-4-4-12)
Asus EN8800 GTX
Zippy 850w
Hello all~
After upgrading my main rig (pictures are coming), I decide clean up 2nd rig. Check the SIG for specs.
Main case is Aluminium which was a lot easier to cut, but this antec metal case took me 2 days for cutting..
Followings are what I've done so far:
(1) replaced the one of 3.5" holder @ the bottom for HDD holder.
(2) replaced side panel.
(3) re-route the wires.
(4) both front and rear fans (2 of 80mm) were replaced for 120mm (Yate Roon).
Hope you enjoy the pics and C&C please~
1
2
3
4
5
6
7
8
9
XP Pro x64 SP2 :: ABIT AB9 QUAD GT :: Intel Core 2 Duo E6600 @ 3.0GHz :: 4 GB Crucial DDR2 800 (PC 6400) 4-4-4-12 ::
74GB WD Raptor :: 300GB Maxtor DiamondMax 10 ::
Seagate 300 GB ATA [external] :: Seagate 500 GB SATA [external] ::
BFG 7950 GT OC :: Dell 2407WFP :: Samsung 204B ::
Logitech G5 :: Saitek Eclipse :: Wacom 6x11 ::
XP Pro SP2 :: ASUS A8N-SLI Deluxe :: AMD 64 X2 4400+ @ 2.5GHz :: 2 GB PQI DDR 400 (PC 3200) 3-4-4-8 ::
80GB WD :: 250 GB Hitachi ::
eVGA 6800GT :: ViewSonic P815 ::
Logitech mx1000 ::
Hello all~
Here is my main rig. Check the SIG for specs.
It's been updated from post # 5432, if anyone got curious. It's Aluminium case has been survived for many years, and I finally started cutting some off~
Followings are what I've done so far:
(1) installed HDD holder. ("iCage")
(2) installed front panel which is covering gap from (1).
(3) re-route the wires.
(4) front fans (2 of 80mm) were replaced for 120mm (Yate Roon).
Hope you enjoy the pics and C&C please~
1
2
3
4
5
6
7
[Just got the new DVD Burner for main rig]
8
[Another shot of New DVD Burner]
XP Pro x64 SP2 :: ABIT AB9 QUAD GT :: Intel Core 2 Duo E6600 @ 3.0GHz :: 4 GB Crucial DDR2 800 (PC 6400) 4-4-4-12 ::
74GB WD Raptor :: 300GB Maxtor DiamondMax 10 ::
Seagate 300 GB ATA [external] :: Seagate 500 GB SATA [external] ::
BFG 7950 GT OC :: Dell 2407WFP :: Samsung 204B ::
Logitech G5 :: Saitek Eclipse :: Wacom 6x11 ::
XP Pro SP2 :: ASUS A8N-SLI Deluxe :: AMD 64 X2 4400+ @ 2.5GHz :: 2 GB PQI DDR 400 (PC 3200) 3-4-4-8 ::
80GB WD :: 250 GB Hitachi ::
eVGA 6800GT :: ViewSonic P815 ::
Logitech mx1000 ::
What sinks are those on the mosfets? I noticed my DFI Infinity doesn't have any vreg coolers.. so I should probably pick some up. Awesome rig btw.. love the color setup.
E6600 @ 3.6
8800GTS @ 660/2000
DFI Infinity P965-S Dark
2 GB G Skill PC6400-HZ
Lian Li PC-65B
Reply With Quote
Bookmarks