It has started...

[Dynasty]

1200w silverstone look-a-like huh...lol......nice 03 score Hipro......

[Zannema]

Good job hipro, very impressive

[Pedro Rocha]

Amazing results as usual

And your setup is so Hipro5 style: full of mods, full of voltage and (of course) full of Delta fans

What speeds (core / shader / mem) and voltages for the Ultras???

Can you run the 8800 Ultras with PCIe at more than 130mhz?? with the 8800GTX used to run Nature easy at 145mhz or more, but the Ultras start to freeze when I use more than 130

[Morgoth]

Brilliant work!

Good to see you back in action

[hipro5]

Thank you gentlemen....

PCI-E was/is at 135MHz......I can do it at 140MHz but I have to clock the VGAs a bit lower though.....

Voltages on VGAs are 1.65VGPU.....Yes I have a Vdroop on them thought it's a bit better than they where default after the mods....I haven't searched yet for a Vdroop mod for them or their OverPower/OverCurrent Protections but I will and I'll report back.....
Pedro if you look at 2k3's photo, you'll see the shaders' clocks at 972MHz core....At 1035MHz, I think that they were over 2580MHz....

@ dinos22: Digital PWR yes sucks but it can handle a Dual CPU....As for the QUAD?....Don't ask.......I had ~43 - 47*C on each Digital Mos-Fet with the Dual @ 5300MHz and 1.93VCore into bios and with the QUAD @ 5000MHz and ONLY 1.7VCore I had ~117*C....

Awesome work as ALWAYS my friend
I wondered how the 05 was with ULTRA's and new forceware, not bad.

I think with a little puss on CPU and on VGAs, I can do over 34k....

[dinos22]

@ dinos22: Digital PWR yes sucks but it can handle a Dual CPU....As for the QUAD?....Don't ask.......I had ~43 - 47*C on each Digital Mos-Fet with the Dual @ 5300MHz and 1.93VCore into bios and with the QUAD @ 5000MHz and ONLY 1.7VCore I had ~117*C....

[PanteraGSTK]

@ dinos22: Digital PWR yes sucks but it can handle a Dual CPU....As for the QUAD?....Don't ask.......I had ~43 - 47*C on each Digital Mos-Fet with the Dual @ 5300MHz and 1.93VCore into bios and with the QUAD @ 5000MHz and ONLY 1.7VCore I had ~117*C....



I think with a little puss on CPU and on VGAs, I can do over 34k....

I bet you can get over 34k as well. It sucks that the mosfets get so hot with a quad. Regular vs. digital...Hmmmm... We need to find a quad oc motherboard that can handle the extra power the quad requires. Apparently, the striker can hold up to the quad, but what about single card. I want to see what you can do single card wise George. Your previous choice with a quad has been a p5w or a p5b (if I'm remembering correctly) so I'm interested in seeing which you choose. I think a p5k deluxe or IP-35pro is what you may have (speculation on my part, but I thought you had posted scores with a p35 motherboard of some sort). Like I said. Single card scores with quad at 5ghz+ is what I'm expecting. You haven't disappointed yet. You and Vince are good at keeping a crowd.

[hipro5]

I bet you can get over 34k as well. It sucks that the mosfets get so hot with a quad. Regular vs. digital...Hmmmm... We need to find a quad oc motherboard that can handle the extra power the quad requires. Apparently, the striker can hold up to the quad, but what about single card. I want to see what you can do single card wise George. Your previous choice with a quad has been a p5w or a p5b (if I'm remembering correctly) so I'm interested in seeing which you choose. I think a p5k deluxe or IP-35pro is what you may have (speculation on my part, but I thought you had posted scores with a p35 motherboard of some sort). Like I said. Single card scores with quad at 5ghz+ is what I'm expecting. You haven't disappointed yet. You and Vince are good at keeping a crowd.

For SINGLE VGA and QUAD, I chose ABIT AW9D-MAX without a doupt.....THE BEST and it only has 4 phase pwr....NO DROOP at all with the QUAD @ 5200MHz+ or 5050MHz 3D at 1.73VCore.....

Here's an older bench of it.....

http://service.futuremark.com/compare?3dm06=1861082

.