DDR2: 600MHz club

[siyah]

my supertalent pc8500 with e6600

[CaNNibaL]

Here are my brand new Mushkin:



Only with 2,4v !

[coop]

Crucial 8500's 2.49v I have another set but can only get 600 @ 1:2 with 2.49v

[bl1zZ]

Core2Duo E4300 @ 3200mhz (400x8)
Asus P5B Deluxe
Mushkin XP2-9200 @ 2.42v real (2.45v bios)
Zalman ZM-600HP

[Cordovader]

Heres a low voltage one (in fact its my 24/7 configuration) :

Crucial Ballistix 2x1gb PC2-8500 600mhz 32m 5-5-5-15 2,1v



And with many more vdimm :

Crucial Ballistix 2x1gb PC2-8500 600mhz 32m 4-4-4-12 2,55v

[Severance]

Ocz 8000vx2 2.25v asus p5k deluxe.

[redratamd]

DFI P965-S Full stock aircooling
Crucial pc5300 Ballistix 2x512mb 615.3 Mhz 4-4-4-12@2,55volts
Pi 1M 615 Pc5300

DFI P965-S Full stock aircooling
Crucial Pc8500 Ballistix 2 X 1024mb 670.3 Mhz 5-5-5-15 @ 2.55volts
Pi 1M 670 Pc8500

[eva2000]

Swapped in 92x38mm Delta 120cfm fan to cool the memory via a rheobus fan controller

System

• Intel Core 2 Duo E6750 ES - L710A438 G0
• Corsair Nautilus 500 3/8" ID
• Asus P5K Deluxe 0311 bios
• 128MB Gainward FX5200 PCI
• 2x1GB Crucial PC2-8500 Ballistix dual channel kit in black dimm slots cooled by 92x38mm Delta 120cfm fan
• 74GB WD Raptor 8MB on SATA 2 port
• Pioneer DVR-08 Burner
• Sony FDD
• 1KW PCP&C SLI psu
• WinXP Pro SP2

Here's where I ended up @665.8Mhz 5-6-5-9 6-35-8-6-8 at 2.55v which is the highest memory frequency I've done to complete Super Pi 32M on any motherboard. Previous best was @650mhz 5-5-5-18 on Asus 680i Striker Extreme with 2x1GB OCZ PC2-9200 FlexXLC at 2.550v.

[NiCKE^]

I used 2.15v for my 600mhz in the first post.

[r.h.]

2x1024MB Corsair XMS2 667MHz (TWIN2X2048-5400C4) rev. 7.1@:

600MHz 5-5-5-15 @2.30V


625MHz 5-5-5-15 @2.40V


with silent aircooling.

[simonnance]

2x1024MB Crucial Aniversary PC2-5300 Cas 3 @ 600Mhz 5-5-5-15, 2.15V (SPi 32 Stable)




Needs 2.25V to be totaly Memtest stable though.

[oktavius]

System
E6400 << just with standard vcore
Asus P5K Non DLX - no mods
2GB Mushkin XP2-8500

1240 / 620Mhz CL 5-5-4-15 2.4V Mushkin XP2-8500
SuperPI 1M stable
http://gm.pc-modz.de/mushkin8500_124...2_2.4_spi1.jpg

1214 / 607Mhz CL 5-5-4-15 2,4V Mushkin XP2-8500
SuperPI 32M stable
http://gm.pc-modz.de/mushkin8500_121..._2.4_spi32.jpg

[Ming@s]

Asus Commando

Ocz FlexXlc 9200

VDimm: 2,50v

[crossg]

2x1024 MB Mushkin XP2 8500 @ 5-5-5-15. 2.35v.

[fireice2]

Hello, here's my entry.

2GB Team Xtreme Dark DDR2-1000 @ DDR2-1200 6-6-6-16


crappy timings but never expected a Promos based memory module to reach that speed @ stock voltages.

[Algeriano]

hello all

2.05V, strap 1333, 602 Mhz

[nullface]

Hello, here's my entry.

2GB Team Xtreme Dark DDR2-1000 @ DDR2-1200 6-6-6-16


crappy timings but never expected a Promos based memory module to reach that speed @ stock voltages.

Oh my maby i should keep my Dominator v2.1 after all

[fireice2]

the highest that I was able to reach with 5-5-5-16 timings was DDR2-1188 /w 2.3v but I was not able to test if it was 1M or 32M stable coz I changed my settings to 6-6-6-16 when it crashed @ ddr2-1190.

[I34z1k]

Finally got over 600 WOOT



Can I post 2?

[korby]

Can I get in with Everest-stable RAM?


Read | Write | Copy | Latency

Team Group TXDD1024M800HC4DC /w 2,6V on DFI Infinity P965.

[Warboy]

http://valid.x86-secret.com/show_oc?id=214291



w00t for personal best in memory speed ^_^

6-6-6-20 @ 2.5v

I will tighten down the Timings later. and then Do a SuperPI 1m test.

[evoic]

I've had my OCZ Reapers up to as high as 1282Mhz with stock 5-5-5-15 timings in Windows, but I didn't run a SuperPi at that speed.

I'll have to crank 'em back up and loosen the timings - I know they'll hit 1300Mhz.

Here's an old screen on a speed above 600Mhz that I did run SuperPi at.



***Just found one that shows a little faster speed....still looking to see if I have screenies of anything higher:



***Just found another, but this was my previous set of OCZ's that maxed out at 632.5Mhz with slightly looser timings.
The replacement set that I have now are even better than the first set. (My eVGA 680i board ate them)

[I34z1k]

My max Where does that place me?

[Algeriano]

For info, my ram (ballistix PC8500 1go) is totaly stable memtesty 1hours (4 passes) 600 Mhz 5-5-5-15 2.2V réal

I don't tested 2.15V réal :P

[Warboy]

Ballastix Tracer PC2-8500 5-5-4-13 @ 1305Mhz / 2.55v Dual Channel.