Quote Originally Posted by XtremeTiramisu View Post
1.*Question: Performance wise, should we set AUTO, Enable or Dissable for the DRAM Static Read Control. There's no doubt that with Transaction booster enabled 0 or 1, there is a significant performance increase. However, from my personal findings and with some of others, we'll have a problem upon booting with no post and screen when both DRAM Static Read Control set to Enable or Auto and Transaction Booster set to Enable 0 or 1. Only by dissabling the DRAM Static Read Control will remedy the problem.
Just as I mentioned in Stilt's thread two weeks ago - post - if you can (which depends on how high FSB and Mem you're on) - the ideal set of settings as far as performance goes is: Static DRAM Control as Enabled, Command Rate at 1T, and Transaction Booster Enabled on Boost 1. But with increasing memory frequency, one will have to finally give up first on 1T, then Static Read Control will need to be Disabled, but even at DDR DDR2-1200 4-4-4 one should be able to stick to Transaction Booster Enabled at Boost 1. I have some screenshots at work, but forgot to transfer it to USB key, which show Dual SPi32M at DDR2-1212 4-4-4, with it Enabled on Boost 1. But at this speed, it was 2T and Static Control Disabled.