Ok good work, already now you could put the settings applied in jumperfree.
  • Multiplier 9
    FSB Frequency: 400
    PCI-E Frequency: 102
    Strap 03:02
    DRAM Frequency: 1200
    Dram Command Rate 2T
    DRAM Timings:-
    CAS# Latency: 5
    RAS# to CAS# Delay: 5
    RAS# Precharge: 5
    RAS# Activate to Precharge: 12
    TWR: 3
    TRFC: 30
    TWTR: 3
    TRRD: 3
    TRTP: 3
    DRAM Static Read Control: Disabled
    Transaction Booster: Enabled
    Boost Level* 1
    Clock Over-Charging Mode: Auto
    Level N/A
    CPU Spread Spectrum: Disabled
    PCIE Spread Spectrum: Disabled
    CPU Voltage: 1.525
    CPU Voltage Reference: Auto
    CPU Voltage Damper: Enabled
    CPU PLL Voltage: 1.5
    DRAM Voltage: 2.3
    FSB Termination Voltage: 1.3
    North Bridge Voltage: 1.4
    North Bridge Voltage Reference: Auto
    South Bridge Voltage: Auto
    Advance CPU Settings
    C1E Suppport Disabled
    Max CPUID Value Limit: Disabled
    Vanderpool Technology: Disabled
    CPU TM Function: Disabled
    Execute Disable Bit Disabled
    PECI: Disabled
    Intel® Speedstep™ Tech Disabled