Tried 0404, and for me it's a no go. Could not even boot with below settings that I use with 0311. Tried memory at 1000 - no go either. SO, back to 0311.
C2D E6700 @ 3.600Ghz
IDLE Temps: 20C-23C
LOAD Temps: 27C-33C
16hrs Orthos stable.
System specs below.
JumperFree Configuration Settings
AI Overclocking: Manual
CPU Ratio Control: Manual
- Ratio CMOS Setting: 9
FSB Strap to Northbridge: AUTO
FSB Frequency: 400
PCI-E Frequency: 100
DRAM Frequency: DDR2-1200
DRAM Command Rate: AUTO
DRAM Timing Control: Manual
CAS# Latency: 5
RAS# to CAS# Delay: 5
RAS# Precharge: 5
RAS# Activate to Precharge: 15
TWR: AUTO
TRFC: AUTO
TWTR: AUTO
TRRD: 3
TRTP: 8
DRAM Static Read Control: AUTO
Transaction Booster: AUTO
Boost Level: (only displays when Transaction Booster is set to Disable or Enabled)
Clock Over-Charging Mode: AUTO
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
CPU Voltage: 1.45
CPU Voltage Reference: AUTO
CPU Voltage Damper: Enabled
CPU PLL Voltage: 1.5
DRAM Voltage: 2.30
FSB Termination Voltage: 1.30v
North Bridge Voltage: 1.40v
North Bridge Voltage Reference: AUTO
South Bridge Voltage: AUTO
Advance CPU Settings
CPU Ratio Control: Manual
- Ratio CMOS Setting: 9
C1E Suppport: Disabaled
Max CPUID Value Limit: Disabaled
Vanderpool Technology: Disabaled
CPU TM Function: Disabaled
Execute Disable Bit: Disabaled
PECI: Enabled
Reply With Quote
Originally Posted by Locust
Bookmarks