The 500MHz+ CAS 3 Club

**Xtreme Addict** · 06-10-2007, 02:42 AM

Ok so do a test. Have you got another memory? Even if it isn't a D9 module, just lower your clocks. Do a run with CL4 in bios in Superpi e.g. 4M (differences to be more visible) and then set CL3 in bios and re-run the test. Do screens and show us all

Then we will judge if it is working or not.

**luihed** · 06-11-2007, 09:46 PM

Bumped it up a lil

spi @ 520fsb

**Hutch** · 06-13-2007, 12:25 PM

Here's my entry, just pulled it off this morning. Was all ready to take the screenshot when I bumped to 333FSB but it wouldn't give me that extra .33mhz so it was only 499mhz. Had to bump another notch and everything started crashing so I quickly snapped and saved, no validation link. I believe I'm the first person to pull it off on a Gigabyte P965 board!

E6400 L628B
Gigabyte P965-S3 Rev 1.0 DS3 F12 Bios vdimm, vmch modded
512MB PC8000 Ballistix

vMCH: 1.68V vDIMM: 2.82V

**oanvoanc** · 06-15-2007, 12:36 AM

hi
does anybody know, whats the wr on cl3 dual cannnel 3-3-3-x ? on intel chipset?
there are too much categories there like
3-4-4-x single channel
3-4-4-x dual channel
3-3-3-x single channel
3-3-3-x dual channel

each on intel and nvidia chipset...... so its hard to compare....

here my result:
ddr2 - 538mhz 3-3-3-9- dual channel 3,1v
http://valid.x86-secret.com/show_oc.php?id=208115

**Sabuy-Sabuy** · 06-20-2007, 07:33 AM

CPU-Z Database DDR2-1122 CL 3-3-3-8 (561Mhz)

**Gautam** · 06-20-2007, 07:38 AM

That's a new WR there, crazy crazy ram you got there.

vdimm?

**Xtreme Addict** · 06-20-2007, 07:41 AM

I think it's impossible on AM2 :|

**Sabuy-Sabuy** · 06-20-2007, 07:48 AM

Originally Posted by Gautam

That's a new WR there, crazy crazy ram you got there.

vdimm?

VDIMM Mod About 3.0v+

**Venom-Crusher** · 06-20-2007, 10:16 AM

Originally Posted by Sabuy-Sabuy

CPU-Z Database DDR2-1122 CL 3-3-3-8 (561Mhz)

Awesome results!! , congratz with new WR

**Savoy** · 06-20-2007, 11:05 AM

Originally Posted by Miravo

I think it's impossible on AM2 :|

Impossible is nothing, buddy.

BTW, Sabuy-Sabuy, You're Sick, dude

**Xtreme Addict** · 06-20-2007, 12:24 PM

If it is real I congratulate you sincerely!

**redratamd** · 06-20-2007, 04:18 PM

You are a lucky guy ,you've got an asus m2n-e with more 250Mhz of fsb .
Like nother .

Originally Posted by Miravo

I think it's impossible on AM2 :|

And why the Vdimm in Ai is 1.95V ,that's the max bios .But with the mod we can't see the Vdimm in the bios ?
Just for fun. I think ,you bench Pi ,and after ,you push for capture.
My Pi with cas 3
Your Pi 1M was runned with higher fsb , higher ram frequency, higher capacity, higher cpu clock and i do better time .I think more vdimm make no more frequency because the memory controller is bad on am2.
I take same things with 2.3 or 2.4 or 2.5 vdimm.If you push Vcore ,there's a gain .

I don't say ,it's a fake . Wait and see.

congratz

**Hutch** · 06-21-2007, 06:11 PM

561mhz cas 3 in Dual Channel with only 3.0V? Pretty crazy

**Sabuy-Sabuy** · 06-22-2007, 01:29 AM

CPU-Z Database DDR2-1150 CL 3-3-3-8 (575Mhz)

**Xtreme Addict** · 06-22-2007, 01:38 AM

There is NO FORCE I shall believe in this! It must be fake. If it wasn't, on Intel P35 chipset it would do about ~ 625 CL3

**Sabuy-Sabuy** · 06-22-2007, 04:21 AM

Originally Posted by Miravo

There is NO FORCE I shall believe in this! It must be fake. If it wasn't, on Intel P35 chipset it would do about ~ 625 CL3

God!!!
575Mhz CAS3 By Clockgen from 564Mhz CAS3 (Bios Boot)

You don't Believe it or You Can not
Stop incriminate
Do It ,and Show Me 625 CAS3 on Intel P35...Please
W&S

Bios Boot CPU-Z Database DDR2-1128 CL 3-3-3-8 (564Mhz)

**Xtreme Addict** · 06-22-2007, 04:25 AM

The highest result CL3 was made on AM2 - by Ozzimark - 506 MHz. On Intel - 55X MHz... And now you show us 575 MHz

If you can - Take a photo while your computer boots at 564 MHz CL3. ?

**bassie** · 06-22-2007, 04:34 AM

Originally Posted by Miravo

The highest result CL3 was made on AM2 - by Ozzimark - 506 MHz. On Intel - 55X MHz... And now you show us 575 MHz

If you can - Take a photo while your computer boots at 564 MHz CL3. ?

Indeed, picture, movie or something. 575 3-4-4-9 is a bit hard to believe.

What voltage used?

**Gautam** · 06-22-2007, 04:36 AM

Someone with more AM2 experience than me will need to pipe in, but somehow I have a feeling that the divider is somehow bugging out with the half multiplier. The divider seems to actually be CPU/6...meaning that the memory speed is actually 470MHz, which seems much more realistic for ~3v on handpicked kingston value ram.

I don't think there's any dishonesty going on here, but unfortunately I also think no video or picture could properly validate it either.

**Xtreme Addict** · 06-22-2007, 04:51 AM

Set normal multiplier and try OC then

**Sesto Sento** · 06-22-2007, 04:53 AM

hell yeah, that superpi time is incredibly bad...
i know that it's difficult to compare... but i've done 28,9xx seconds on opty 144 @ 2.85 and some bh5 @ low fsb (21xmhz don't remember well) @ 2-2-2-5...

i've never had an AM2, but i think with the same (+/-) clockspeed and that insane memory clock @ 3-3-3-x it should be a lot better than mine...
but hey, it's just speculation from me, like i said before... i've never had any experience with AM2...

even now, without any tweak and an O.S full of crap, i can do better than that... and this is without ANY Tweak not even realtime and explorer closed...

**MorueM** · 06-22-2007, 02:22 PM

I was doing 31,5sec with AM2 3800+ single core clocked 2.8ghz 280x10 with 2x1gb mem1:1 timings 3.3.3.8.1t on an abit a9n32x fatal1ty...

**redratamd** · 06-23-2007, 02:54 PM

Name : redratamd & Florent
Brand :Crucial
Modele : PC5300
Size : 1x512
Real Voltage : 2.7V
Timings : 3-3-3-8
Frequency : 506.5MHz
Sort of bench : Valid CPU-Z
Cooling : Aircooling
Screen :506.5 Pc5300 crucial