Water Cooled Case Gallery

[Grinch]

Hope you like it

very nice!

[Pigeon]

Nice one BeeN, very nice looking.

How have you got the rad mounted in that thing?

[BeeN]

Yep in the bottom works a Thermochill P120.3 with the Performance Shroud mounted on it and the Pump (Laing DCC) too.

[jagt]

Here's my humble contribution, which is nothing compared to some of the monstrousities previously posted in this thread. It gets the job done though. I'll be upgrading towards an 8800GTX w/MCW60 + Unisink very soon. Sorry for the lousy JPEG compression:

[Solarfall]

@LeChuck dang that rad looks kinda mad... i like it

[BooStFeD]

Thought i would share my new case and set-up with you all. Hope everyone

ejoys . Will take some better detail pictures later. I am too excited that it

is finnaly up and running.

Old Set-up



New Set-up

[Patriote]

Been and Le Chuck : Talk about watercooling a computer...LOL

jagt : Hmm...I saw that Stacker somewhere **Cough**John**Cough** Heh

Anyway, it's awesome and looks like one of my numerous Stacker \ PA120.3 build!

[jagt]

jagt :Hmm...I saw that Stacker somewhere **Cough**John**Cough** Heh

Yer, that's me. I've been lurking here since 2002 or something The Stacker suits my needs perfectly. It's roomy and easy to mod. It's style is rather minimalistic compared to other "blingy" cases, and since I don't care for bling, it's perfect.

[echn111]

I recently sold off my 2nd 8800GTX as I found maintaing SLI wasn't worth it. Then replaced my eVGA 680i M/B with a new Gigabyte P35-DQ6 board and redid my loop. And since I'm using this system 24/7 I moved from a DDC-2 to the dependable Laing D5 Vario and changed my tubing from 3/8" to 1/2" (which is ironic considering there is talk of people moving from 1/2" to 3/8"). But so far I'm quite content with the changes.

Here are the results:

Front view:


Overview.


Closeup of the loop. I went for a very simple loop with only two blocks and a T-Line; nothing complicated like my previous loop:

[N H O]

i love it man, very clean

[Dark Prodigy]

I recently sold off my 2nd 8800GTX as I found maintaing SLI wasn't worth it.

How hard is it to maintain SLi? What's involved in that?

[echn111]

How hard is it to maintain SLi? What's involved in that?

Perhaps should have rephrased that. Maintaining an extra 8800GTX in my system, even if completely unusued and without SLI active, caused my system to consume more electricity and put pressure on my PSU and increased the noise level of my PC. Even worse, while it acted as a glorified paperweight in my PC, it dumped it's heat into the waterloop.

And while turning SLI on may have helped framerate a bit, in terms of actual use within games, it really didn't make much of a difference except to push my PSU into overdrive, increase heat and consume electricity. Fine it increased my benchmarks, but in terms of actual use, one overclocked 8800GTX handled everything anyway.

So I didn't gain anything by SLI except a larger electricity bill, a noiser PC, and a hotter running PC. Having tried it, I think SLI is overrated.

p.s. I am aware that I could have created more loops to handle the extra heat. But given the (questionable) benefits SLI has verses one overclocked 8800GTX, I'd rather not focus my efforts here.

[echn111]

i love it man, very clean

Thanks. I prefer clean, simple loops.

[N H O]

I prefer clean, simple loops.

me too

[aiya]

Thanks. I prefer clean, simple loops.

nice loop man. i like to keeps things simple too

seeing your case makes me want it and i think it will be my next case too, lol. i like to keep my watercooling internal and your case seems to be the one that can do it with a 240 rad without much modding.

[coolrmaster]

me 4. took about 3 or 4 revisions on my setup to get clean

btw: i'd give up a kidney before one my 8800gtx sli cards

qx6700 / fuzion
8800gtx sli wc by danger den
pa120.3
G70 case

[cyberspyder]

GJ dude, looks sexy

[afireinside]

Nice looking loop. Short and sweet. I don't like the full cover block at all though. And your SLI troubles are worth it for the badass factor Plus it will benefit when we get dx10 games.

[Patriote]

me too

Ditto! Nice and clean. Great set-up echn111

[Morgoth]

There is more of my setup outside the case, rather than in

It should all be in once I get a GPU block for the HD2900XT and drill some holes in the case to mount the rad

[Patriote]

Awesome new pics of my system. Just took them

Thats with new 8800GTX (Big Thanks goes to Dynasty ) installed and some more cable management done. Also, i removed that crappy mosfet Asus include with their motherboard...It would not make any temps difference and the NB would become enough hot that i couldn't touch it for more than 5 secs. Instead, i removed the Asus "shield" and hooked my Sunon 60mm fan. NB is pretty much just warm now.







PS: I know... I know... In the first pic you can actually see some of my toes right next to my phone. Go figure why it's on the floor

[Mankz_91]

^^ nice build.

[Patriote]

^^ nice build.

Thanks I'm hoping to put that heat-dispenser (8800GTX) onto watercooling pretty soon. I have a DD NV-88GTX WB. But i think it'll suck. So, i might get a EK or use one of my multiple MCW60s.

[Garrett]

Thanks I'm hoping to put that heat-dispenser (8800GTX) onto watercooling pretty soon. I have a DD NV-88GTX WB. But i think it'll suck. So, i might get a EK or use one of my multiple MCW60s.

You have a DD block and you think it'll suck? lol...

I gotta say the EK block is pretty good, keeps my 8800GTS 640mb @ 40 idle 44 load
I'm currently busy working my own case now, nothing special just a Lian Li PC71... PA120.3 comes within 2 weeks and then... pics

[Ming@s]