Ciao giorgio, good to see you BiB (Back in Benching)
1) Yes, around 2.6v (2.65v set in bios, if I remember) - it is not just smart guardian in bios you can also watch some drop on voltages
Remember to alaways use active cooling on top of the memory sticks!!
Of course not all mem sticks do 450Mhz 3-3-3-3..1T - but booth my Corsairs pairs of 2GB (8500C5 and 6400C3) do with appropriate voltage.
2) That's very strange, never happend to me - board just crash and restart. If you push the EZ power on button for more than 4 secs board back to default, so never need to to use CMOS jumper.
You should save your profile in bios - for example in Bank1 I have the x6800 4.8 1:1 3-3-3-1T
I use Bios 4CTST521 that are for all Extreme (X series) no just for Quads - the description is quite clear
So if you are using your X6800 try to use 512-"quad" (4CTST521.zip ) - they are also available here http://www.lejabeach.com/DFI/dfilpnf680i/Date Code 2007/05/21
File 4CTST504.zip
Size 509,123 bytes
Major Reasons of Change:
1.Fixed Core Multi-Processing function fail issue on Intel Core 2 Extreme QX6700 /X6800 CPUs.
2.For Intel Core 2 Quad ,Intel Core 2 Extreme & X6800 CPUs only.
3.Fixed CPU Bselect can’t set to Auto mode with E6750(FSB 1333MHz) CPU.
4.DRAM Voltage will be selected on 3.04V when doing the load last bootable setting.
5.Fixed CPU Fan speed control.
Hope you can solve the problems, I want you guys from Team Italy BiB and specially to see if you learn my quick Cebit lesson about my favorite game![]()
![]()





)
Reply With Quote
Bookmarks