Official GIGA P35-S3/DS3/DS3R/DS3P/DS4/DQ6 bios/info thread

[zsamz_]

Detailed P35-DQ6 review, they only reached 482FSB:

http://www.pcstats.com/articleview.cfm?articleID=2118

I'm staring to think it could veyr well be CPU limitations.

i hit 500fsb still testing
my e6400 hit 3.5 i'm sure can go even higher temps 46 idle
memory @1000mhz 5-5-5-15
16 seconds in superpi 1m
sweet board

[Tutti-frutti]

i have a question, other than the DDR3 what does the DDR3 ver of the DS3R have over the non DDR3 version? because theres like a $50 difference in price, or is the DS3P worth getting over the DS3R performance and OC wise?

DDR3 is the only difference. Here are the differences between all the P35-boards (Dutch). The P35T-boards are not in it, but the only differences with the non-T versions are the DDR3-slots instead of DDR2-slots.

I think the DS3P will be a little better in overclocking, because it has better cooling.

[yenclas]

Gigabyte GA-P35-DS4
E6600 B2 L6 28
G.skill HZ 6400
Ybris cooling

3600 400x9 vcore 1.4


3780 430x9 vcore 1.5


4000 444x9 vcore 1.6


fsb 500 OCLABS KIT



FSB 505 CON YBRIS KIT (YBRIS ONE,120 X2)


Sandra Memory Tests
5-5-5-5 1000 3600



4-4-4-4 1000 3600



5-5-5-5 1100 3520




4-4-4-4 1100 3520




EVEREST MEMORY LATENCY TESTS



5-5-5-5 1000 3600



4-4-4-4 1000 3600




5-5-5-5 1100 3520




4-4-4-4 1100 3520



5-5-5-5 1000 500x7 1.55 vcore





4-4-4-4 1000 500x7 1.55 vcore






5-5-5-5 1000 500x7 1.55 vcore sandra cpu bench

Hello Hiwa.

Can you post all your memory timmings to do 500 FSB with GSKILL HZ's ?

Thank you very much !

[hiwa]

Hello Hiwa.

Can you post all your memory timmings to do 500 FSB with GSKILL HZ's ?

Thank you very much !

Last 3 tests

[megatron]

Since this is an "bios/info" thread I will post my findings here. I read a review at legionhardware that the xp-120 fitted with the crazy cool stuff. It does after u remove the backplate and twist the crazy cool heatpipe to clear the heatsink:

[yenclas]

Last 3 tests

Thanks Hiwa,

but I refer to advanced timmings in Bios when Press Ctrl+F1.

Can you post your voltage settings in bios too ?

Sorry, but I can't do more than 490 FSB.

Do you think that 2,45 of vdimm isn't dangerous ?

Thanks !!!

[hiwa]

Thanks Hiwa,

but I refer to advanced timmings in Bios when Press Ctrl+F1.

Can you post your voltage settings in bios too ?

Sorry, but I can't do more than 490 FSB.

Do you think that 2,45 of vdimm isn't dangerous ?

Thanks !!!

http://www.pctuner.info/up/image.php...04195411_1.gif

[lowfat]

2.45Vdimm is a lot, definately for 24/7.

[hiwa]

2.45Vdimm is a lot, definately for 24/7.

hmmfor daily yes , gkill hz with aircooling for bench, i tried 1200 with 2.45

on giga boards +0.50 mean 2.30 vdimm yenclas

[megatron]

http://www.pctuner.info/up/image.php...04195411_1.gif

Hi Hiwa, does high vcore help with fsb speeds? Since your core clock is relatively modest (3Ghz) and you use 1.6v vcore.

[hiwa]

Hi Hiwa, does high vcore help with fsb speeds? Since your core clock is relatively modest (3Ghz) and you use 1.6v vcore.

I think i can't boot at 500x7 with 1.5 vcore but i can boot 420x9 with same vcore

[lowfat]

Here is what i use for 24/7 for my FSB.

This is 4 sticks of ram too. I quite enjoy this motherboard.

[Richard Dower]

Two new reviews of the P35-DS3R:

http://www.legitreviews.com/article/513/1/

http://www.bit-tech.net/hardware/200..._ga-p35-ds3r/1

[Richard Dower]

Lowfat....why not use a 7x multi?...your SuperPi score would go way up.

[lowfat]

Lowfat....why not use a 7x multi?...your SuperPi score would go way up.

I do use a 7X multi generally. I was just testing to make sure that FSB was stable first.

[dt744190]

I just recently got P35 DQ6 and Ballistix Tracer 8500. But having alot troubles with the memory.
BIOS F3: Default settings 800 2:3 5-5-5-18 1.8 volt
BIOS F4: Default settings 1066 1:2 5-7-7-24 2.2 volt

I can't run Memtest86+ v1.70, Memtest 3.2, Orthos Blendtest without my computer hangs up.
With F3 BIOS at default settings, I can run all the tests without problem, but when set manually to 1:2 to run it at 1066 Mhz 2.2-2.40 volt and the freezing came back.

Can stresstest the CPU, even with OC to 3.2 Ghz without any problem and it's the Tracer I having alot problem with.

Thought I got faulty modules, but with BIOS F3: Default settings 800 2:3 5-5-5-18 1.8 volt and 4 Pass without any errors reported. It doesn't lokes like it's faulty modules I got and I got no idea what's wrong here.

Everything in BIOS is set to default settings, all Eist etc is disabled and trying with both Auto/manual set the RAM settings too find the problem with all the freezings.

With Everest BETA 4.0.0 it reports:
Northbridge: 1.25 volt
Southbridge: 1.05 volt

Aren't this too low?

[KoeiNL]

Anyone knows if the Tuniq fits on the mobo? (The DS4)

[dcode2006]

P35 DQ6 owners on here are saying that the F4 bios is crap compared to F3 in mem scores, how much worse off is it ? and anyone know whats improved in F4 over F3 according to Gigabyte. Thanx.

[megatron]

Anyone knows if the Tuniq fits on the mobo? (The DS4)

Pretty sure Ive seen a pic with the Tuniq facing up and fitting with the crazy cool heatsinks.

[megatron]

Why cant I install the intel storage matrix driver? It says my system is not up to spec. When I change the bios options from IDE mode to AHCI or Raid mode, I get blue screen on boot up. Catch 22?

[CERO]

Why cant I install the intel storage matrix driver? It says my system is not up to spec. When I change the bios options from IDE mode to AHCI or Raid mode, I get blue screen on boot up. Catch 22?

Are u running vista? if so take a look at this, got this from Asus P5k deluxe thread:

About that ich9r raid issue.. I found out that it is the intel matrix driver issue. it is a fix\workaround awailable @ http://www.station-drivers.com/telec...el/msm7.5.html

mid page... Possible Issues with Intel® RAID and Window Vista....

read and do the reg modification. worked for me. i have not installed the intel matrix windows app. just the chipset driver.

[megatron]

Are u running vista? if so take a look at this, got this from Asus P5k deluxe thread:

Im running windows xp pro 64-bit atm. Just wanted to test if there was any speed benifit or else with installing the intel matrix storage driver.

[AcUaViVa]

one noob question

is posible tu insert ICH9R Driver in windows xp? without floppy of curse.

thanks

[Richard Dower]

one noob question

is posible tu insert ICH9R Driver in windows xp? without floppy of curse.

thanks

Yes, slipstream using nlite...Google

[Richard Dower]

New Realtek 8111B LAN driver, June 4th 2007:

http://www.realtek.com.tw/downloads/...&GetDown=false