find it's so exciting for overclking 2*4core xeon, like driving a ferrari
great help from Dave and DDTUNG, I'll keep pushing the monster, haha
Fritz Chess, break 15k
World No.3 wprime1024m, dont know why slower so much than hassan
World No.3 wprime32m
do u wanna see 8core @ 400fsb ?
Last edited by VictorWang; 06-01-2007 at 10:25 AM.
Very nice Victor! You got help from the best I can say that muchIs that the limit or can you still push it? Now lets see some of that oc knowledge you have in that head of yours pour out into this setup
haha, of course it's not the limit.
ambient=20c
cooler=HP Xeon Cooler with 4 heatpipe PUT on cpu (mounting not compatiable with SM mobo )
mobo= un moded.
cpu= pin moded
vcore idle=1.26v
vcore loaded= 1.22v
I'll throw this setup under cold after vcore/vdimm/vnb mod.
hope to achieve 4ghz 8core, haha
I really love SM's mobo, super !!!
Glad to see this!
That run with the memory at 399.9:
What are you using for memory?
I bluescreen above 363mhz.
Crunch with us, the XS WCG team
The XS WCG team needs your support.
A good project with good goals.
Come join us,get that warm fuzzy feeling that you've done something good for mankind.
Originally Posted by Frisch
lol...kingston 667 1g*2Glad to see this!
That run with the memory at 399.9:
What are you using for memory?
I bluescreen above 363mhz.
cheap
this pair can do 416mhz
maybe the 2 sticks is the key.lol...kingston 667 1g*2
cheap
this pair can do 416mhz
Kaz-n also used 2 512mb sticks for his cinebench runs at 3789
All my testing is with 4-1 gig mushkin sticks.
Try a run at 10x333 to 350 if you get a chance.
I can do SP1M at 10X333 but thats it..faster and it bluescreens
and what do you see for temps at full load?
Last edited by Movieman; 06-01-2007 at 10:59 AM.
Crunch with us, the XS WCG team
The XS WCG team needs your support.
A good project with good goals.
Come join us,get that warm fuzzy feeling that you've done something good for mankind.
3789mhz = 378.9*10, ram=378.9
or if vdimm moded, 378.9*5/4=473.6, haha, that would be awesome
I havent do vcore mod, SS at 3.5Ghz.
still have a lot space to go, haha
Last edited by VictorWang; 06-01-2007 at 11:02 AM.
I do know he had the cpu's at 1.46v for that run. I don't think he had the memory volts above stock.3789mhz = 378.9*10, ram=378.9
or if vdimm moded, 378.9*5/4=473.6, haha, that would be awesome
He was also on water cooling.
Crunch with us, the XS WCG team
The XS WCG team needs your support.
A good project with good goals.
Come join us,get that warm fuzzy feeling that you've done something good for mankind.
Just wondering what Mod's have been done, if any? Also what do you have cooling these things?
-SS
lol....1.46v @.@
i'm running on 1.26v idle/1.22v loaded and air cooling
too busy to have enough time to play and make all the things perfect.
but I'll finish all after come back from computex
I wondered how long until you'd be here!
read post#3
Best of luck to you on this. We'll wait to see what you can bring out of this "slow server board!lol....1.46v @.@
i'm running on 1.26v idle/1.22v loaded and air cooling
too busy to have enough time to play and make all the things perfect.
but I'll finish all after come back from computex
Last edited by Movieman; 06-01-2007 at 11:09 AM.
Crunch with us, the XS WCG team
The XS WCG team needs your support.
A good project with good goals.
Come join us,get that warm fuzzy feeling that you've done something good for mankind.
Love to see what more you can get out of this system, i'd love to mod my Tyan S2692 if possible :/
נְפִילִים
LOL. I have to admit when I saw VW posting on 5350 OC results I thought to my self: "Ooh, this is going to be good."
read post#3...
I'm curious is this with the mem on a 5:4 divider? I cant seem to get mine to run without it. I assumed I had to mod the chip to get it to run 1:1. Am I missing something in the bios?
-SS
I wonder how many PPD it can produce in WCG....
Fast computers breed slow, lazy programmers
The price of reliability is the pursuit of the utmost simplicity. It is a price which the very rich find most hard to pay.
http://www.lighterra.com/papers/modernmicroprocessors/
Modern Ram, makes an old overclocker miss BH-5 and the fun it was
You need to do the BSEL(piece of elec tape on the G30 pad) to see 1:1 in memory but don't need to do a volt mod.LOL. I have to admit when I saw VW posting on 5350 OC results I thought to my self: "Ooh, this is going to be good."
I'm curious is this with the mem on a 5:4 divider? I cant seem to get mine to run without it. I assumed I had to mod the chip to get it to run 1:1. Am I missing something in the bios?
-SS
at 2667: 18-20K....at 3150: 25k..at 3500..I don't know, but I'd like to see.
Crunch with us, the XS WCG team
The XS WCG team needs your support.
A good project with good goals.
Come join us,get that warm fuzzy feeling that you've done something good for mankind.
Thats what I thought. I just realized I needed to read post #3 more carefully.
Not hittin on all the cylinders today...
-SS
That's ok, I get plenty of those days..Thats what I thought. I just realized I needed to read post #3 more carefully.
Not hittin on all the cylinders today...
-SS
Roll of elec tape, single edge razor blade,fine tweezers, a clean flat nonporous cutting surface and 5x magnification are all you need.
Even my old eyes did it. Helps if you can get a 2nd party to either hold the mag glass or one of those head bands with mag glass built in.
REAL small piece of tape to work with!
Crunch with us, the XS WCG team
The XS WCG team needs your support.
A good project with good goals.
Come join us,get that warm fuzzy feeling that you've done something good for mankind.
Victor - you say Wprime?
Heres a few hints that you may already use.
1) When starting up the program, quickly grab the bottom left windown handle of the dialogue button and minimise it to the smallest it will go.... this will give you a big boost.
2) On Dual cores selecting 4 threads instead of 2 gave big increase. On Kents I didn't notice any/much difference of selcting say 8 threads., but on your x8 select 16 threads... just to experiment in the advanced button.
Get back to me with your results... or perhaps you know this already.
Need 4 dual rank sticks of ram for optimal bandwidth, VictorWang.
I've got 4x1GB Kingston ValueRam 667mhz FB-DIMM's but mine stop at 400mhz... figuring out vdimm mod on my X7DAL-E still. Have VNB figured out I think, but FB-DIMM's are limiting, not northbridge (other than heat, 80c+ without directed air) as far as I can tell.
All along the watchtower the watchmen watch the eternal return.
lol, thx riptide,
1) i've tried before but it does slower
maybe due to os optimize.
and after mini the window, u can only run wprime for 1time, 2nd time cannot finish.
2) clowertown have no HT, so 4cores to 8threads, 8cores to 16threads is running slower, and I've tried also.
for me, i'm now running wprime at least 3times, scores would be better
yes, I've noticed that, so a 4000rpm 9cm fan cooling NB and Ram
would u plz share ur X7DAL-E's vdimm/nb mod guide, I think SM mobo all the same
Something for you to shoot for:
I got down to 6.8s on wPrime and Hassan got to 6.3s with a dual clover at 3500mhz on water..
Crunch with us, the XS WCG team
The XS WCG team needs your support.
A good project with good goals.
Come join us,get that warm fuzzy feeling that you've done something good for mankind.
Here's the running thread http://www.xtremesystems.org/forums/...d.php?t=144181[B][I]yes, I've noticed that, so a 4000rpm 9cm fan cooling NB and Ram
would u plz share ur X7DAL-E's vdimm/nb mod guide, I think SM mobo all the same
Also playing in email... see if dave can with hold the info or if that was too much tease for him lmao
All along the watchtower the watchmen watch the eternal return.
Dave's lips are sealed..Here's the running thread http://www.xtremesystems.org/forums/...d.php?t=144181
Also playing in email... see if dave can with hold the info or if that was too much tease for him lmao
Crunch with us, the XS WCG team
The XS WCG team needs your support.
A good project with good goals.
Come join us,get that warm fuzzy feeling that you've done something good for mankind.
I DO hope this rig is staying on WCG?
ok, how about this
I just found that not my tweak skill prob but OS problem,
change to WinXP sp2(originally was Win2K3)
score improved a lot although xp is not stable as 2k3 (20mhz less clk)
xeon 5350 wprime1024m WR ?
3.26Ghz wprime1024m=204.672sec
3.33Ghz wprime32m=6.625sec
ok, I'll check after I'm back from computexHere's the running thread http://www.xtremesystems.org/forums/...d.php?t=144181
Also playing in email... see if dave can with hold the info or if that was too much tease for him lmao
Posting Permissions
Reply With Quote
Bookmarks