i have a 60x25mm sunon 23.5cfm Maglev fan over the NB heatsink.. even at 1.55v it's barely warm to touch ..

Crucial Ballistix PC2-8500
@600Mhz 5-5-5-15 at 2.2v


Next memory to test out are these fresh babies which arrived today = 2 sets of 2x1GB Crucial Ballistix PC2-8500 modules





I plucked in the first pair and already I can tell these modules will overclock very nicely - out of the box 600Mhz 5-5-5-15 with AUTO sub timings at 2.20v vdimm on Asus P5K Deluxe!

JumperFree Configuration Settings
AI Overclocking: Manual
CPU Ratio Control: Manual
- Ratio CMOS Setting: 9
FSB Frequency: 400
PCI-E Frequency: 100
DRAM Frequency: DDR2-1200
DRAM Timing Control: Manual
CAS# Latency: 5
RAS# to CAS# Delay: 5
RAS# Precharge: 5
RAS# Activate to Precharge: 16
TWR: AUTO
TRFC: AUTO
TWTR: AUTO
TRRD: AUTO
TRTP: AUTO
DRAM Static Read Control: Disabled

Transaction Booster: AUTO
Boost Level: N/A
Clock Over-Charging Mode: AUTO

CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled

CPU Voltage: 1.4750
CPU Voltage Reference: AUTO
CPU Voltage Damper: Enabled
CPU PLL Voltage: 1.50
DRAM Voltage: 2.20v
FSB Termination Voltage: 1.30
North Bridge Voltage: 1.55
North Bridge Voltage Reference: AUTO
South Bridge Voltage: AUTO

Advance CPU Settings
CPU Ratio Control: Manual
- Ratio CMOS Setting: 9
C1E Suppport: Disabled
Max CPUID Value Limit: Disabled
Vanderpool Technology: Disabled
CPU TM Function: Disabled
Execute Disable Bit: Disabled
PECI: Enabled

USB Configuration
USB Functions: Enabled
Legacy USB Support: Disabled (need to enable it to detect USB flash drives)


Single 32M


Dual 32M